Hi team,
Received an E120S with no power fault and emmc connection successful.
Is the Emmc healthy?
Note:
Did factory repair with SHV-E120S tar file. still dead.
log below.
Factory repair log
Received an E120S with no power fault and emmc connection successful.
Is the Emmc healthy?
Note:
Did factory repair with SHV-E120S tar file. still dead.
log below.
Code:
Model Settings:
Interface : eMMC
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC KYL00M
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 1501004B594C30304D12BC1B46FF6FAB
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : KYL00M
Product revision : 1.2
Product serial number : (hex) BC1B46FF
Manufacturing date : 06/2012
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 512 Kbytes
Boot2 size : 512 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7340032 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/KYL00M_29_03_2018_20_31_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.6; FW: 1.23.
P00: RESERVED (00000001, 00032000) 100 MB
P01: FSBL (00032001, 000003E8) 500 KB
P02: HTC (000323E9, 00000BB8) 1500 KB
P03: APPSBL (00034000, 000003E8) 500 KB
P04: QCSBL (00036000, 00001000) 2048 KB
P05: ABOOT (00038000, 00001388) 2500 KB
P06: BOOT (0003A000, 00005000) 10 MB
P07: OSBL (00040000, 000003E8) 500 KB
P08: SSD (00042000, 000003E8) 500 KB
P09: PIT (00044000, 000003E8) 500 KB
P10: PARAM (00046000, 00005000) 10 MB
P11: FAT32 (0004C000, 00031000) 98 MB
P12: MODEM_ST1 (0007E000, 00001800) 3072 KB
P13: MODEM_ST2 (00080000, 00001800) 3072 KB
P14: PART_58 (00082000, 00001800) 3072 KB
P15: MDM (00084000, 00031000) 98 MB
P16: EFS1 (000B6000, 00001800) 3072 KB
P17: EFS2 (000B8000, 00001800) 3072 KB
P18: PART_5B (000BA000, 00001800) 3072 KB
P19: PART_AB (000BC000, 00005000) 10 MB
P20: PART_60 (000C2000, 00005000) 10 MB
P21: FOTA (000C8000, 00005000) 10 MB
P22: PART_A5 (000CE000, 001C1000) 898 MB
P23: PART_A6 (00290000, 00401000) 2050 MB
P24: PART_A8 (00692000, 00097000) 302 MB
P25: PART_A9 (0072A000, 00040800) 129 MB
P26: FS (0076C000, 015EE000) 10.96 GB
Code:
E120S_22-11-2015_19-29-48.pit
Open file "C:/Users/Celltrics Lap/Desktop/SHV-E120S.UH20/SHV-E120S.UH20/HOME_E120S.UH20.1252_CL1045781_REV03_user_low_ship.tar".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition BOOT... Done.
Writing partition MODEM... Done.
Switched to boot area partition 2.
Writing partition MDM... Done.
Writing partition RECOVERY... Done.
Writing partition SYSTEM... Done.
Writing is finished.
SW: 1.5.6; FW: 1.23.
Remove write protect successfully completed.
Disconnected.
