Hello teamm finally i made it its world first LG D631 kill switch remove done by mohamed mahdi goulmima
big thanks to mamde gsm and medusa team
first i got this one with kill switch that no one has disbled so first i request the help from team and he give me the misc partition after write it download mode ok but i dont find V20 firmware in internet so i made easy repair by medusapro and i write the v10 firwarez and kill switch has disabled
for misc you can download it here
http://forum.gsmhosting.com/vbb/f664...wered-2362941/
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D631
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D631_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 008GE0
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 1101003030384745300019E1039251EF
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 008GE0
Product revision : 0.0
Product serial number : (hex) 19E10392
Manufacturing date : 05/2014
---------------------------------------------------------------
CSD Info
CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/008GE0_17_03_2018_16_40_44.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 00020000) 64 MB
P02: sbl1 (00024000, 00000800) 1024 KB
P03: rpm (00024800, 00000400) 512 KB
P04: tz (00024C00, 00000400) 512 KB
P05: sdi (00025000, 00000400) 512 KB
P06: aboot (00025400, 00001000) 2048 KB
P07: rpmb (00026400, 00000400) 512 KB
P08: tzb (00026800, 00000400) 512 KB
P09: abootb (00026C00, 00001000) 2048 KB
P10: pad (00027C00, 00001000) 2048 KB
P11: modemst1 (00028C00, 00001800) 3072 KB
P12: modemst2 (0002A400, 00001800) 3072 KB
P13: misc (0002BC00, 00008000) 16 MB
P14: persist (00034000, 00010000) 32 MB
P15: laf (00044000, 0000B000) 22 MB
P16: boot (00050000, 0000B000) 22 MB
P17: recovery (0005B000, 0000B000) 22 MB
P18: fsg (00066000, 00001800) 3072 KB
P19: fsc (00068000, 00000400) 512 KB
P20: ssd (00068400, 00000400) 512 KB
P21: DDR (0006C000, 00000400) 512 KB
P22: encrypt (00070000, 00000400) 512 KB
P23: rct (00070400, 00000400) 512 KB
P24: drm (00074000, 00004000) 8 MB
P25: sns (00078000, 00004000) 8 MB
P26: factory (0007C000, 0000A000) 20 MB
P27: fota (00086000, 00010000) 32 MB
P28: sbl1b (00098000, 00000800) 1024 KB
P29: mpt (00098800, 00010000) 32 MB
P30: eksst (000A8800, 00000400) 512 KB
P31: system (000AC000, 00400000) 2048 MB
P32: cache (004AC000, 001C2000) 900 MB
P33: userdata (0066E000, 00810400) 4.032 GB
P34: grow (00E80000, 0000FFDF) 31.98 MB
The same area.
Opening C:/Users/SIMO/Desktop/changed_misc_PhysPart_0_17_03_2018_11_59_10.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.5.5; FW: 1.23.
Disconnected.
------
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D631
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D631_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 008GE0
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 1101003030384745300019E1039251EF
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 008GE0
Product revision : 0.0
Product serial number : (hex) 19E10392
Manufacturing date : 05/2014
---------------------------------------------------------------
CSD Info
CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/008GE0_17_03_2018_20_01_27.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 00020000) 64 MB
P02: sbl1 (00024000, 00000800) 1024 KB
P03: rpm (00024800, 00000400) 512 KB
P04: tz (00024C00, 00000400) 512 KB
P05: sdi (00025000, 00000400) 512 KB
P06: aboot (00025400, 00001000) 2048 KB
P07: rpmb (00026400, 00000400) 512 KB
P08: tzb (00026800, 00000400) 512 KB
P09: abootb (00026C00, 00001000) 2048 KB
P10: pad (00027C00, 00001000) 2048 KB
P11: modemst1 (00028C00, 00001800) 3072 KB
P12: modemst2 (0002A400, 00001800) 3072 KB
P13: misc (0002BC00, 00008000) 16 MB
P14: persist (00034000, 00010000) 32 MB
P15: laf (00044000, 0000B000) 22 MB
P16: boot (00050000, 0000B000) 22 MB
P17: recovery (0005B000, 0000B000) 22 MB
P18: fsg (00066000, 00001800) 3072 KB
P19: fsc (00068000, 00000400) 512 KB
P20: ssd (00068400, 00000400) 512 KB
P21: DDR (0006C000, 00000400) 512 KB
P22: encrypt (00070000, 00000400) 512 KB
P23: rct (00070400, 00000400) 512 KB
P24: drm (00074000, 00004000) 8 MB
P25: sns (00078000, 00004000) 8 MB
P26: factory (0007C000, 0000A000) 20 MB
P27: fota (00086000, 00010000) 32 MB
P28: sbl1b (00098000, 00000800) 1024 KB
P29: mpt (00098800, 00010000) 32 MB
P30: eksst (000A8800, 00000400) 512 KB
P31: system (000AC000, 00400000) 2048 MB
P32: cache (004AC000, 001C2000) 900 MB
P33: userdata (0066E000, 00810400) 4.032 GB
P34: grow (00E80000, 0000FFDF) 31.98 MB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D631_EMMC.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing sdi partition... Done.
Writing aboot partition... Done.
Writing pad partition... Done.
Writing misc partition... Done.
Writing laf partition... Done.
Writing boot partition... Done.
Smart Repair is successfully complete.
SW: 1.5.5; FW: 1.23.
Disconnected.
---------------------------
Welcome to Octoplus/Octopus Box LG Software version 2.8.0
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM7
Selected model: D631
Reading info...
Mode: Emergency
Initializing flash...OK
SW version: LGD631AT-00-V10b-310-410-JUL-13-2014+0
Android version: 5.0.2
LAF Version: 1.0
Product ID: YT01S141029004322
IMEI: 014087-00-163104-4
Target operator: ATT
Hardware: rev_10
Performed by 2.8.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM7
Selected model: D631
Reading info...
Model ID: LG-D631
IMEI: 014087-00-163104-4
Android version: 4.4.2
Battery level: 90%
SW Version: D63110b
Mode: Emergency
Initializing flash...OK
SW version: LGD631AT-00-V10b-310-410-JUL-13-2014+0
Android version: 5.0.2
LAF Version: 1.0
Product ID: YT01S141029004322
IMEI: 014087-00-163104-4
Target operator: ATT
Hardware: rev_10
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
--------------------------------------------------------------------------------
Opening "LGD631AT-01-V10b-310-410-JUL-13-2014+0.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing rpm...OK
Writing tz...OK
Writing sdi...OK
Writing aboot...OK
Writing rpmb...OK
Writing tzb...OK
Writing abootb...OK
Writing persist...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing factory...OK
Writing sbl1b...OK
Writing system...OK
Writing BackupGPT...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.8.0 Software version.
big thanks to mamde gsm and medusa team
first i got this one with kill switch that no one has disbled so first i request the help from team and he give me the misc partition after write it download mode ok but i dont find V20 firmware in internet so i made easy repair by medusapro and i write the v10 firwarez and kill switch has disabled
for misc you can download it here
http://forum.gsmhosting.com/vbb/f664...wered-2362941/
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D631
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D631_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 008GE0
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 1101003030384745300019E1039251EF
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 008GE0
Product revision : 0.0
Product serial number : (hex) 19E10392
Manufacturing date : 05/2014
---------------------------------------------------------------
CSD Info
CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/008GE0_17_03_2018_16_40_44.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 00020000) 64 MB
P02: sbl1 (00024000, 00000800) 1024 KB
P03: rpm (00024800, 00000400) 512 KB
P04: tz (00024C00, 00000400) 512 KB
P05: sdi (00025000, 00000400) 512 KB
P06: aboot (00025400, 00001000) 2048 KB
P07: rpmb (00026400, 00000400) 512 KB
P08: tzb (00026800, 00000400) 512 KB
P09: abootb (00026C00, 00001000) 2048 KB
P10: pad (00027C00, 00001000) 2048 KB
P11: modemst1 (00028C00, 00001800) 3072 KB
P12: modemst2 (0002A400, 00001800) 3072 KB
P13: misc (0002BC00, 00008000) 16 MB
P14: persist (00034000, 00010000) 32 MB
P15: laf (00044000, 0000B000) 22 MB
P16: boot (00050000, 0000B000) 22 MB
P17: recovery (0005B000, 0000B000) 22 MB
P18: fsg (00066000, 00001800) 3072 KB
P19: fsc (00068000, 00000400) 512 KB
P20: ssd (00068400, 00000400) 512 KB
P21: DDR (0006C000, 00000400) 512 KB
P22: encrypt (00070000, 00000400) 512 KB
P23: rct (00070400, 00000400) 512 KB
P24: drm (00074000, 00004000) 8 MB
P25: sns (00078000, 00004000) 8 MB
P26: factory (0007C000, 0000A000) 20 MB
P27: fota (00086000, 00010000) 32 MB
P28: sbl1b (00098000, 00000800) 1024 KB
P29: mpt (00098800, 00010000) 32 MB
P30: eksst (000A8800, 00000400) 512 KB
P31: system (000AC000, 00400000) 2048 MB
P32: cache (004AC000, 001C2000) 900 MB
P33: userdata (0066E000, 00810400) 4.032 GB
P34: grow (00E80000, 0000FFDF) 31.98 MB
The same area.
Opening C:/Users/SIMO/Desktop/changed_misc_PhysPart_0_17_03_2018_11_59_10.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.5.5; FW: 1.23.
Disconnected.
------
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D631
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D631_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 008GE0
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 1101003030384745300019E1039251EF
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 008GE0
Product revision : 0.0
Product serial number : (hex) 19E10392
Manufacturing date : 05/2014
---------------------------------------------------------------
CSD Info
CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/008GE0_17_03_2018_20_01_27.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 00020000) 64 MB
P02: sbl1 (00024000, 00000800) 1024 KB
P03: rpm (00024800, 00000400) 512 KB
P04: tz (00024C00, 00000400) 512 KB
P05: sdi (00025000, 00000400) 512 KB
P06: aboot (00025400, 00001000) 2048 KB
P07: rpmb (00026400, 00000400) 512 KB
P08: tzb (00026800, 00000400) 512 KB
P09: abootb (00026C00, 00001000) 2048 KB
P10: pad (00027C00, 00001000) 2048 KB
P11: modemst1 (00028C00, 00001800) 3072 KB
P12: modemst2 (0002A400, 00001800) 3072 KB
P13: misc (0002BC00, 00008000) 16 MB
P14: persist (00034000, 00010000) 32 MB
P15: laf (00044000, 0000B000) 22 MB
P16: boot (00050000, 0000B000) 22 MB
P17: recovery (0005B000, 0000B000) 22 MB
P18: fsg (00066000, 00001800) 3072 KB
P19: fsc (00068000, 00000400) 512 KB
P20: ssd (00068400, 00000400) 512 KB
P21: DDR (0006C000, 00000400) 512 KB
P22: encrypt (00070000, 00000400) 512 KB
P23: rct (00070400, 00000400) 512 KB
P24: drm (00074000, 00004000) 8 MB
P25: sns (00078000, 00004000) 8 MB
P26: factory (0007C000, 0000A000) 20 MB
P27: fota (00086000, 00010000) 32 MB
P28: sbl1b (00098000, 00000800) 1024 KB
P29: mpt (00098800, 00010000) 32 MB
P30: eksst (000A8800, 00000400) 512 KB
P31: system (000AC000, 00400000) 2048 MB
P32: cache (004AC000, 001C2000) 900 MB
P33: userdata (0066E000, 00810400) 4.032 GB
P34: grow (00E80000, 0000FFDF) 31.98 MB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/LG_D631_EMMC.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing sdi partition... Done.
Writing aboot partition... Done.
Writing pad partition... Done.
Writing misc partition... Done.
Writing laf partition... Done.
Writing boot partition... Done.
Smart Repair is successfully complete.
SW: 1.5.5; FW: 1.23.
Disconnected.
---------------------------
Welcome to Octoplus/Octopus Box LG Software version 2.8.0
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM7
Selected model: D631
Reading info...
Mode: Emergency
Initializing flash...OK
SW version: LGD631AT-00-V10b-310-410-JUL-13-2014+0
Android version: 5.0.2
LAF Version: 1.0
Product ID: YT01S141029004322
IMEI: 014087-00-163104-4
Target operator: ATT
Hardware: rev_10
Performed by 2.8.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM7
Selected model: D631
Reading info...
Model ID: LG-D631
IMEI: 014087-00-163104-4
Android version: 4.4.2
Battery level: 90%
SW Version: D63110b
Mode: Emergency
Initializing flash...OK
SW version: LGD631AT-00-V10b-310-410-JUL-13-2014+0
Android version: 5.0.2
LAF Version: 1.0
Product ID: YT01S141029004322
IMEI: 014087-00-163104-4
Target operator: ATT
Hardware: rev_10
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
--------------------------------------------------------------------------------
Opening "LGD631AT-01-V10b-310-410-JUL-13-2014+0.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing rpm...OK
Writing tz...OK
Writing sdi...OK
Writing aboot...OK
Writing rpmb...OK
Writing tzb...OK
Writing abootb...OK
Writing persist...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing factory...OK
Writing sbl1b...OK
Writing system...OK
Writing BackupGPT...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.8.0 Software version.
