Galaxy s8 hard bricked after z3x flashing

Hello team

I've tried to flash g950f with latest version of z3x and latest fiwmare on your support, but phone is dead and system was not flashed in opertation


FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-G950F
Software version: 31.5

File analysis... OK
Total file size: 0x1C3BB834 (451 Mb)
Searching USB Flash interface... COM36 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending up_param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending modem.bin.lz4... OK
Sending modem_debug.bin.lz4... OK
Sending cache.img.lz4... OK
Sending omr.img.lz4... OK
Flashing done (time - 00:00:29)

Done with Samsung Tool PRO v.31.5

https://ibb.co/fByPjH