Problems is Password i try to into in > Recovery Mode
the saying emmc read only So I Deside removed Write Protect Using Medusa Pro
AFTER Conncet Saccessfully Go To EMMC Tab Tick Remove Write Protect
After That Remove Wire And Test DONE No Need Flashing Methode DONE
the saying emmc read only So I Deside removed Write Protect Using Medusa Pro
AFTER Conncet Saccessfully Go To EMMC Tab Tick Remove Write Protect
After That Remove Wire And Test DONE No Need Flashing Methode DONE
Code:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC SJS00A
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 150100534A5330304103360837701165
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SJS00A
Product revision : 0.3
Product serial number : (hex) 36083770
Manufacturing date : 01/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFE78A406033
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 1024 Kbytes
Boot2 size : 1024 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/SJS00A_17_04_2018_03_05_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.1; FW: 1.22.
P00: FSBL (00000001, 00000028) 20 KB
P01: QCSBL (00000029, 00000258) 300 KB
P02: FAT32 (00000281, 00041000) 130 MB
P03: PART_6A (00042000, 00006000) 12 MB
P04: OSBL (00048000, 00002000) 4 MB
P05: PART_63 (0004A000, 00002000) 4 MB
P06: PART_58 (0004C000, 00001800) 3072 KB
P07: MODEM_ST1 (0004E000, 00001800) 3072 KB
P08: MODEM_ST2 (00050000, 00001800) 3072 KB
P09: APPSBL (00052000, 00002000) 4 MB
P10: BOOT (00054000, 00004000) 8 MB
P11: PART_60 (00058000, 0000A000) 20 MB
P12: PART_6C (00062000, 00002000) 4 MB
P13: EXT2FS (00064000, 00060000) 192 MB
P14: EXT2FS (000C4000, 00028000) 80 MB
P15: EXT2FS (000EC000, 00200000) 1024 MB
P16: EXT2FS (002EC000, 00240000) 1152 MB
P17: PART_6B (0052C000, 0021C000) 1080 MB
