LG G4 LS991 DEAD RECOVER SUCCESS
all credits medusa pro team
all credits medusa pro team
Code:
Model Settings:
Interface : eMMC
Brand : LG
Model : LS991
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_LS991_EMMC_032G74.SRF
Voltage : 2.0V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 032G74
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 11010030333247373400D95020646235
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 032G74
Product revision : 0.0
Product serial number : (hex) D9502064
Manufacturing date : 06/2015
---------------------------------------------------------------
CSD Info
CSD : D02700320F5903FFFFFFFFE78640009B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15269888 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 884736
Number of sectors : 8478720
Device Manufacturer :lge
Device Platform :msm8992
Build ID :MRA58K
Display Build ID :MRA58K
Release ID :6.0
Device Model :LG-H815
Device Name :p1_global_com
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :p1_global_com-user 6.0 MRA58K 1706918213d18 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/032G74_09_04_2018_14_49_57.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.7; FW: 1.23.
P00: GPT (00000000, 00008000) 16 MB
P01: modem (00008000, 0002B000) 86 MB
P02: pmic (00038000, 00000400) 512 KB
P03: sbl1 (00038400, 00000800) 1024 KB
P04: tz (00038C00, 00000800) 1024 KB
P05: sdi (00039400, 00000400) 512 KB
P06: hyp (00039800, 00000400) 512 KB
P07: rpm (00039C00, 00000400) 512 KB
P08: aboot (0003A000, 00001000) 2048 KB
P09: sbl1bak (0003B000, 00000800) 1024 KB
P10: pmicbak (0003B800, 00000400) 512 KB
P11: tzbak (0003BC00, 00000800) 1024 KB
P12: hypbak (0003C400, 00000400) 512 KB
P13: rpmbak (0003C800, 00000400) 512 KB
P14: abootbak (0003CC00, 00001000) 2048 KB
P15: sdibak (0003DC00, 00000400) 512 KB
P16: limits (0003E000, 00000400) 512 KB
P17: devinfo (0003E400, 00000400) 512 KB
P18: apdp (0003E800, 00000400) 512 KB
P19: msadp (0003EC00, 00000400) 512 KB
P20: dpo (0003F000, 00000400) 512 KB
P21: spare1 (0003F400, 00000C00) 1536 KB
P22: misc (00040000, 00008000) 16 MB
P23: persist (00048000, 00010000) 32 MB
P24: modemst1 (00058000, 00000C00) 1536 KB
P25: modemst2 (00058C00, 00000C00) 1536 KB
P26: fsg (00059800, 00000C00) 1536 KB
P27: fsc (0005A400, 00000400) 512 KB
P28: ssd (0005A800, 00000400) 512 KB
P29: keystore (0005AC00, 00000400) 512 KB
P30: DDR (0005B000, 00001000) 2048 KB
P31: sec (0005C000, 00000400) 512 KB
P32: encrypt (0005C400, 00000400) 512 KB
P33: eksst (0005C800, 00000400) 512 KB
P34: rct (0005CC00, 00000400) 512 KB
P35: persistent (0005D000, 00001000) 2048 KB
P36: spare2 (0005E000, 00002000) 4 MB
P37: laf (00060000, 00018000) 48 MB
P38: boot (00078000, 00014000) 40 MB
P39: recovery (0008C000, 00014000) 40 MB
P40: drm (000A0000, 00004000) 8 MB
P41: sns (000A4000, 00004000) 8 MB
P42: mpt (000A8000, 00010000) 32 MB
P43: factory (000B8000, 00017000) 46 MB
P44: fota (000CF000, 00005000) 10 MB
P45: raw_resources (000D4000, 00002000) 4 MB
P46: raw_resourcesbak (000D6000, 00002000) 4 MB
P47: system (000D8000, 00816000) 4.043 GB
P48: cust (008EE000, 00080000) 256 MB
P49: cache (00970000, 00268000) 1232 MB
P50: userdata (00BD8000, 02E60000) 23.19 GB
P51: grow (03A38000, 00005FDF) 11.98 MB
Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_LS991_EMMC_032G74.SRF".
Write data verification is enabled.
Writing GPT partition... Done.
Writing pmic partition... Done.
Writing sbl1 partition... Done.
Writing tz partition... Done.
Writing sdi partition... Done.
Writing hyp partition... Done.
Writing rpm partition... Done.
Writing aboot partition... Done.
Writing limits partition... Done.
Writing devinfo partition... Done.
Writing apdp partition... Done.
Writing msadp partition... Done.
Writing dpo partition... Done.
Writing spare1 partition... Done.
Writing misc partition... Done.
Writing persist partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing fsg partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing keystore partition... Done.
Writing DDR partition... Done.
Writing sec partition... Done.
Writing encrypt partition... Done.
Writing eksst partition... Done.
Writing rct partition... Done.
Writing persistent partition... Done.
Writing laf partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing raw_resources partition... Done.
Smart Repair is successfully complete.
SW: 1.5.7; FW: 1.23.
Disconnected.
