Today I try to Read Dump From a Working Moto XT-1068...
BUT Medusa Box Pro Showing wrong info... BUT same connectivity with Another Box Showing currect Info...:rolleyes:
Medusa Team Please help to solve this problem....
Here is Full Details...
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Sandisk eMMC SDW16G
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 450100534457313647019F762D802207
Manufacturer ID : 0X45
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SDW16G
Product revision : 0.1
Product serial number : (hex) 9F762D80
Manufacturing date : 02/1999
---------------------------------------------------------------
CSD Info
CSD : D00F00320F5903FFFFFFFFEF8A40401F
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 10 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 0 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/SDW16G_10_04_2018_13_03_31.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.7; FW: 1.23.
BUT Medusa Box Pro Showing wrong info... BUT same connectivity with Another Box Showing currect Info...:rolleyes:
Medusa Team Please help to solve this problem....
Here is Full Details...
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Sandisk eMMC SDW16G
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 450100534457313647019F762D802207
Manufacturer ID : 0X45
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SDW16G
Product revision : 0.1
Product serial number : (hex) 9F762D80
Manufacturing date : 02/1999
---------------------------------------------------------------
CSD Info
CSD : D00F00320F5903FFFFFFFFEF8A40401F
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 10 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 0 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/SDW16G_10_04_2018_13_03_31.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.7; FW: 1.23.
