SM-G532G still dead after repairing
Welcome to Medusa Pro Software version 1.4.5.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G532G
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 90014A483847347592010311E8FA54A7
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 311E8FA
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 393216
Number of sectors : 6307840
Device Manufacturer : samsung
Device Platform : mt6737t
Build ID : MMB29T
Display Build ID : MMB29T.G532GDXU1APJ3
Release ID : 6.0.1
Device Model : SM-G532G
Device Name : grandppltedx
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : grandppltedx-user 6.0.1 MMB29T G532GDXU1APJ3 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u_02_11_2017_12_49_44.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.5; FW: 1.22.
P00: GPT (00000000, 00002000)
P01: bota0 (00002000, 00002000)
P02: nvram (00004000, 00004000)
P03: lk (00008000, 00001000)
P04: bota1 (00009000, 00001000)
P05: secro (0000A000, 00003800)
P06: seccfg (0000D800, 00000400)
P07: efuse (0000DC00, 00000400)
P08: tee1 (0000E000, 00003000)
P09: bota2 (00011000, 00003000)
P10: efs (00014000, 00004000)
P11: nvdata (00018000, 00010000)
P12: param (00028000, 00004000)
P13: recovery (0002C000, 00008000)
P14: boot (00034000, 00008000)
P15: md1img (0003C000, 00010000)
P16: md1dsp (0004C000, 00002000)
P17: keystore (0004E000, 00004000)
P18: omekeystore (00052000, 00001C00)
P19: proinfo (00053C00, 00001400)
P20: para (00055000, 00000400)
P21: persistent (00055400, 00000400)
P22: steady (00055800, 00000800)
P23: protect1 (00056000, 00004000)
P24: protect2 (0005A000, 00004000)
P25: reserve2 (0005E000, 00002000)
P26: system (00060000, 00604000)
P27: cache (00664000, 000C8000)
P28: hidden (0072C000, 0001E000)
P29: userdata (0074A000, 00744000)
Selected pit file: E:/Samsung/Android Firmwares/G532G/G532GDXU1AQI2_MYM_6.0.1/GRANDPPLTE_CIS_SER.pit
Open file "E:/Samsung/Android Firmwares/G532G/G532GDXU1AQI2_MYM_6.0.1/BL_G532GDXU1AQI2_CL12327063_QB15069235_REV00_user_ low_ship_MULTI_CERT.tar".
Open file "E:/Samsung/Android Firmwares/G532G/G532GDXU1AQI2_MYM_6.0.1/AP_G532GDXU1AQI2_CL12327063_QB15069235_REV00_user_ low_ship_MULTI_CERT.tar".
Open file "E:/Samsung/Android Firmwares/G532G/G532GDXU1AQI2_MYM_6.0.1/CP_G532GDXU1AQA3_CL10452964_QB12393484_REV00_user_ low_ship_MULTI_CERT.tar".
Open file "E:/Samsung/Android Firmwares/G532G/G532GDXU1AQI2_MYM_6.0.1/CSC_OLB_G532GOLB1AQI2_CL12327063_QB15069235_REV00_ user_low_ship_MULTI_CERT.tar".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOTLOADER... Done.
Switched to user area.
Writing partition lk... Done.
Writing partition secro... Done.
Writing partition efuse... Done.
Writing partition tee1... Done.
Writing partition PARAM... Done.
Writing partition recovery... Done.
Writing partition boot... Done.
Writing partition md1img... Done.
Writing partition md1dsp... Done.
Writing partition system... Done.
Writing partition cache... Done.
Writing partition hidden... Done.
Writing partition userdata... Done.
Writing is finished.
SW: 1.4.5; FW: 1.22.
smart repair Successfull but still dead
Welcome to Medusa Pro Software version 1.4.5.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G532G
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 90014A483847347592010311E8FA54A7
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 311E8FA
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u_02_11_2017_14_22_22.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.5; FW: 1.22.
P00: GPT (00000000, 00002000)
P01: bota0 (00002000, 00002000)
P02: nvram (00004000, 00004000)
P03: lk (00008000, 00001000)
P04: bota1 (00009000, 00001000)
P05: secro (0000A000, 00003800)
P06: seccfg (0000D800, 00000400)
P07: efuse (0000DC00, 00000400)
P08: tee1 (0000E000, 00003000)
P09: bota2 (00011000, 00003000)
P10: efs (00014000, 00004000)
P11: nvdata (00018000, 00010000)
P12: param (00028000, 00004000)
P13: recovery (0002C000, 00008000)
P14: boot (00034000, 00008000)
P15: md1img (0003C000, 00010000)
P16: md1dsp (0004C000, 00002000)
P17: keystore (0004E000, 00004000)
P18: omekeystore (00052000, 00001C00)
P19: proinfo (00053C00, 00001400)
P20: para (00055000, 00000400)
P21: persistent (00055400, 00000400)
P22: steady (00055800, 00000800)
P23: protect1 (00056000, 00004000)
P24: protect2 (0005A000, 00004000)
P25: reserve2 (0005E000, 00002000)
P26: system (00060000, 00604000)
P27: cache (00664000, 000C8000)
P28: hidden (0072C000, 0001E000)
P29: userdata (0074A000, 00744000)
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition... Done.
Switched to user area.
Writing GPT partition... Done.
Writing bota0 partition... Done.
Writing lk partition... Done.
Writing bota1 partition... Done.
Writing secro partition... Done.
Writing seccfg partition... Done.
Writing efuse partition... Done.
Writing tee1 partition... Done.
Writing bota2 partition... Done.
Writing efs partition... Done.
Writing param partition... Done.
Writing recovery partition... Done.
Writing boot partition... Done.
Writing md1img partition... Done.
Writing md1dsp partition... Done.
Writing keystore partition... Done.
Writing omekeystore partition... Done.
Writing proinfo partition... Done.
Writing para partition... Done.
Writing persistent partition... Done.
Writing steady partition... Done.
Smart Repair is successfully complete.
SW: 1.4.5; FW: 1.22.
Welcome to Medusa Pro Software version 1.4.5.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G532G
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 90014A483847347592010311E8FA54A7
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 311E8FA
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 393216
Number of sectors : 6307840
Device Manufacturer : samsung
Device Platform : mt6737t
Build ID : MMB29T
Display Build ID : MMB29T.G532GDXU1APJ3
Release ID : 6.0.1
Device Model : SM-G532G
Device Name : grandppltedx
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : grandppltedx-user 6.0.1 MMB29T G532GDXU1APJ3 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u_02_11_2017_12_49_44.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.5; FW: 1.22.
P00: GPT (00000000, 00002000)
P01: bota0 (00002000, 00002000)
P02: nvram (00004000, 00004000)
P03: lk (00008000, 00001000)
P04: bota1 (00009000, 00001000)
P05: secro (0000A000, 00003800)
P06: seccfg (0000D800, 00000400)
P07: efuse (0000DC00, 00000400)
P08: tee1 (0000E000, 00003000)
P09: bota2 (00011000, 00003000)
P10: efs (00014000, 00004000)
P11: nvdata (00018000, 00010000)
P12: param (00028000, 00004000)
P13: recovery (0002C000, 00008000)
P14: boot (00034000, 00008000)
P15: md1img (0003C000, 00010000)
P16: md1dsp (0004C000, 00002000)
P17: keystore (0004E000, 00004000)
P18: omekeystore (00052000, 00001C00)
P19: proinfo (00053C00, 00001400)
P20: para (00055000, 00000400)
P21: persistent (00055400, 00000400)
P22: steady (00055800, 00000800)
P23: protect1 (00056000, 00004000)
P24: protect2 (0005A000, 00004000)
P25: reserve2 (0005E000, 00002000)
P26: system (00060000, 00604000)
P27: cache (00664000, 000C8000)
P28: hidden (0072C000, 0001E000)
P29: userdata (0074A000, 00744000)
Selected pit file: E:/Samsung/Android Firmwares/G532G/G532GDXU1AQI2_MYM_6.0.1/GRANDPPLTE_CIS_SER.pit
Open file "E:/Samsung/Android Firmwares/G532G/G532GDXU1AQI2_MYM_6.0.1/BL_G532GDXU1AQI2_CL12327063_QB15069235_REV00_user_ low_ship_MULTI_CERT.tar".
Open file "E:/Samsung/Android Firmwares/G532G/G532GDXU1AQI2_MYM_6.0.1/AP_G532GDXU1AQI2_CL12327063_QB15069235_REV00_user_ low_ship_MULTI_CERT.tar".
Open file "E:/Samsung/Android Firmwares/G532G/G532GDXU1AQI2_MYM_6.0.1/CP_G532GDXU1AQA3_CL10452964_QB12393484_REV00_user_ low_ship_MULTI_CERT.tar".
Open file "E:/Samsung/Android Firmwares/G532G/G532GDXU1AQI2_MYM_6.0.1/CSC_OLB_G532GOLB1AQI2_CL12327063_QB15069235_REV00_ user_low_ship_MULTI_CERT.tar".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOTLOADER... Done.
Switched to user area.
Writing partition lk... Done.
Writing partition secro... Done.
Writing partition efuse... Done.
Writing partition tee1... Done.
Writing partition PARAM... Done.
Writing partition recovery... Done.
Writing partition boot... Done.
Writing partition md1img... Done.
Writing partition md1dsp... Done.
Writing partition system... Done.
Writing partition cache... Done.
Writing partition hidden... Done.
Writing partition userdata... Done.
Writing is finished.
SW: 1.4.5; FW: 1.22.
smart repair Successfull but still dead
Welcome to Medusa Pro Software version 1.4.5.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G532G
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 90014A483847347592010311E8FA54A7
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 311E8FA
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u_02_11_2017_14_22_22.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.5; FW: 1.22.
P00: GPT (00000000, 00002000)
P01: bota0 (00002000, 00002000)
P02: nvram (00004000, 00004000)
P03: lk (00008000, 00001000)
P04: bota1 (00009000, 00001000)
P05: secro (0000A000, 00003800)
P06: seccfg (0000D800, 00000400)
P07: efuse (0000DC00, 00000400)
P08: tee1 (0000E000, 00003000)
P09: bota2 (00011000, 00003000)
P10: efs (00014000, 00004000)
P11: nvdata (00018000, 00010000)
P12: param (00028000, 00004000)
P13: recovery (0002C000, 00008000)
P14: boot (00034000, 00008000)
P15: md1img (0003C000, 00010000)
P16: md1dsp (0004C000, 00002000)
P17: keystore (0004E000, 00004000)
P18: omekeystore (00052000, 00001C00)
P19: proinfo (00053C00, 00001400)
P20: para (00055000, 00000400)
P21: persistent (00055400, 00000400)
P22: steady (00055800, 00000800)
P23: protect1 (00056000, 00004000)
P24: protect2 (0005A000, 00004000)
P25: reserve2 (0005E000, 00002000)
P26: system (00060000, 00604000)
P27: cache (00664000, 000C8000)
P28: hidden (0072C000, 0001E000)
P29: userdata (0074A000, 00744000)
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition... Done.
Switched to user area.
Writing GPT partition... Done.
Writing bota0 partition... Done.
Writing lk partition... Done.
Writing bota1 partition... Done.
Writing secro partition... Done.
Writing seccfg partition... Done.
Writing efuse partition... Done.
Writing tee1 partition... Done.
Writing bota2 partition... Done.
Writing efs partition... Done.
Writing param partition... Done.
Writing recovery partition... Done.
Writing boot partition... Done.
Writing md1img partition... Done.
Writing md1dsp partition... Done.
Writing keystore partition... Done.
Writing omekeystore partition... Done.
Writing proinfo partition... Done.
Writing para partition... Done.
Writing persistent partition... Done.
Writing steady partition... Done.
Smart Repair is successfully complete.
SW: 1.4.5; FW: 1.22.
