Successfully remove FRP on LG TP450 (V10e):
Welcome to Medusa Pro Software version 1.5.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : TP450
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_TP450_EMMC_FFILE.srf
Voltage : 2.2V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100515831334D4207F6ECE07F541D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) F6ECE07F
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 950272
Number of sectors : 7602176
Device Manufacturer :lge
Device Platform :msm8937
Build ID :NRD90U
Display Build ID :NRD90U
Release ID :7.0
Device Model :LG-TP450
Device Name :sf340n_tmo_us
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :sf340n_tmo_us-user 7.0 NRD90U 1734209441f47 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QX13MB_20_04_2018_19_15_24.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.7; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 0002C000) 88 MB
P02: aboot (00030000, 00001000) 2048 KB
P03: abootbak (00031000, 00001000) 2048 KB
P04: tz (00032000, 00001000) 2048 KB
P05: tzbak (00033000, 00001000) 2048 KB
P06: sbl1 (00034000, 00000800) 1024 KB
P07: sbl1bak (00034800, 00000800) 1024 KB
P08: rpm (00035000, 00000400) 512 KB
P09: rpmbak (00035400, 00000400) 512 KB
P10: devcfg (00035800, 00000400) 512 KB
P11: devcfgbak (00035C00, 00000400) 512 KB
P12: cmnlib (00036000, 00000400) 512 KB
P13: cmnlibbak (00036400, 00000400) 512 KB
P14: cmnlib64 (00036800, 00000400) 512 KB
P15: cmnlib64bak (00036C00, 00000400) 512 KB
P16: keymaster (00037000, 00000400) 512 KB
P17: keymasterbak (00037400, 00000400) 512 KB
P18: spare1 (00037800, 00000400) 512 KB
P19: spare2 (00037C00, 00000400) 512 KB
P20: persistent (00038000, 00000400) 512 KB
P21: devinfo (00038400, 00000800) 1024 KB
P22: spare3 (00038C00, 00003400) 6.5 MB
P23: modemst1 (0003C000, 00000C00) 1536 KB
P24: modemst2 (0003CC00, 00000C00) 1536 KB
P25: mcfg (0003D800, 00002000) 4 MB
P26: fsc (0003F800, 00000400) 512 KB
P27: ssd (0003FC00, 00000400) 512 KB
P28: fsg (00040000, 00000C00) 1536 KB
P29: spare4 (00040C00, 00003400) 6.5 MB
P30: dsp (00044000, 00008000) 16 MB
P31: ftm (0004C000, 00004000) 8 MB
P32: misc (00050000, 00004000) 8 MB
P33: drm (00054000, 00004000) 8 MB
P34: sns (00058000, 00004000) 8 MB
P35: fota (0005C000, 00005000) 10 MB
P36: sec (00061000, 00000400) 512 KB
P37: keystore (00061400, 00000400) 512 KB
P38: rct (00061800, 00000400) 512 KB
P39: encrypt (00061C00, 00000400) 512 KB
P40: eksst (00062000, 00000400) 512 KB
P41: apdp (00062400, 00000400) 512 KB
P42: msadp (00062800, 00000400) 512 KB
P43: dpo (00062C00, 00000400) 512 KB
P44: DDR (00063000, 00000400) 512 KB
P45: spare5 (00063400, 00000C00) 1536 KB
P46: boot (00064000, 00010000) 32 MB
P47: laf (00074000, 00010000) 32 MB
P48: lafbak (00084000, 00010000) 32 MB
P49: recovery (00094000, 00010000) 32 MB
P50: recoverybak (000A4000, 00010000) 32 MB
P51: factory (000B4000, 0001C000) 56 MB
P52: raw_resources (000D0000, 00002000) 4 MB
P53: raw_resourcesbak (000D2000, 00002000) 4 MB
P54: persist (000D4000, 00010000) 32 MB
P55: mpt (000E4000, 00004000) 8 MB
P56: system (000E8000, 00740000) 3712 MB
P57: cache (00828000, 00268000) 1232 MB
P58: userdata (00A90000, 02FADFDE) 23.84 GB
P59: grow (03A3DFDE, 00000001) 512 b
Backuping FRP data...
Opening C:/Program Files/Medusa Pro Software/Backups/FRP_0x38000_0x400_20_04_2018_19_15_30.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.5.7; FW: 1.23.
Removing FRP. Please wait... Done.
SW: 1.5.7; FW: 1.23.
Disconnected.
Welcome to Medusa Pro Software version 1.5.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : TP450
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_TP450_EMMC_FFILE.srf
Voltage : 2.2V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100515831334D4207F6ECE07F541D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) F6ECE07F
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 950272
Number of sectors : 7602176
Device Manufacturer :lge
Device Platform :msm8937
Build ID :NRD90U
Display Build ID :NRD90U
Release ID :7.0
Device Model :LG-TP450
Device Name :sf340n_tmo_us
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :sf340n_tmo_us-user 7.0 NRD90U 1734209441f47 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QX13MB_20_04_2018_19_15_24.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.7; FW: 1.23.
P00: GPT (00000000, 00004000) 8 MB
P01: modem (00004000, 0002C000) 88 MB
P02: aboot (00030000, 00001000) 2048 KB
P03: abootbak (00031000, 00001000) 2048 KB
P04: tz (00032000, 00001000) 2048 KB
P05: tzbak (00033000, 00001000) 2048 KB
P06: sbl1 (00034000, 00000800) 1024 KB
P07: sbl1bak (00034800, 00000800) 1024 KB
P08: rpm (00035000, 00000400) 512 KB
P09: rpmbak (00035400, 00000400) 512 KB
P10: devcfg (00035800, 00000400) 512 KB
P11: devcfgbak (00035C00, 00000400) 512 KB
P12: cmnlib (00036000, 00000400) 512 KB
P13: cmnlibbak (00036400, 00000400) 512 KB
P14: cmnlib64 (00036800, 00000400) 512 KB
P15: cmnlib64bak (00036C00, 00000400) 512 KB
P16: keymaster (00037000, 00000400) 512 KB
P17: keymasterbak (00037400, 00000400) 512 KB
P18: spare1 (00037800, 00000400) 512 KB
P19: spare2 (00037C00, 00000400) 512 KB
P20: persistent (00038000, 00000400) 512 KB
P21: devinfo (00038400, 00000800) 1024 KB
P22: spare3 (00038C00, 00003400) 6.5 MB
P23: modemst1 (0003C000, 00000C00) 1536 KB
P24: modemst2 (0003CC00, 00000C00) 1536 KB
P25: mcfg (0003D800, 00002000) 4 MB
P26: fsc (0003F800, 00000400) 512 KB
P27: ssd (0003FC00, 00000400) 512 KB
P28: fsg (00040000, 00000C00) 1536 KB
P29: spare4 (00040C00, 00003400) 6.5 MB
P30: dsp (00044000, 00008000) 16 MB
P31: ftm (0004C000, 00004000) 8 MB
P32: misc (00050000, 00004000) 8 MB
P33: drm (00054000, 00004000) 8 MB
P34: sns (00058000, 00004000) 8 MB
P35: fota (0005C000, 00005000) 10 MB
P36: sec (00061000, 00000400) 512 KB
P37: keystore (00061400, 00000400) 512 KB
P38: rct (00061800, 00000400) 512 KB
P39: encrypt (00061C00, 00000400) 512 KB
P40: eksst (00062000, 00000400) 512 KB
P41: apdp (00062400, 00000400) 512 KB
P42: msadp (00062800, 00000400) 512 KB
P43: dpo (00062C00, 00000400) 512 KB
P44: DDR (00063000, 00000400) 512 KB
P45: spare5 (00063400, 00000C00) 1536 KB
P46: boot (00064000, 00010000) 32 MB
P47: laf (00074000, 00010000) 32 MB
P48: lafbak (00084000, 00010000) 32 MB
P49: recovery (00094000, 00010000) 32 MB
P50: recoverybak (000A4000, 00010000) 32 MB
P51: factory (000B4000, 0001C000) 56 MB
P52: raw_resources (000D0000, 00002000) 4 MB
P53: raw_resourcesbak (000D2000, 00002000) 4 MB
P54: persist (000D4000, 00010000) 32 MB
P55: mpt (000E4000, 00004000) 8 MB
P56: system (000E8000, 00740000) 3712 MB
P57: cache (00828000, 00268000) 1232 MB
P58: userdata (00A90000, 02FADFDE) 23.84 GB
P59: grow (03A3DFDE, 00000001) 512 b
Backuping FRP data...
Opening C:/Program Files/Medusa Pro Software/Backups/FRP_0x38000_0x400_20_04_2018_19_15_30.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.5.7; FW: 1.23.
Removing FRP. Please wait... Done.
SW: 1.5.7; FW: 1.23.
Disconnected.
