Hi,
Im working on a GT-P3100 TAB which hangs on logo and failed to flash firmware in odin.
I soldered all wires perfectly according to pinout but it detects only when usb is plugged, without usb it doesn't connect.
With USB it connects only once and connection not stable , need to re-plug usb everytime to connect.:confused:
log below
USB PLUGGED
NO USB
Im working on a GT-P3100 TAB which hangs on logo and failed to flash firmware in odin.
I soldered all wires perfectly according to pinout but it detects only when usb is plugged, without usb it doesn't connect.
With USB it connects only once and connection not stable , need to re-plug usb everytime to connect.:confused:
log below
USB PLUGGED
Code:
Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-P3100
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-P3100_EMMC_M8G2FB.srf
Voltage : 2.0V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC MAG2GA
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 1501004D414732474107AD050DC95F77
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : MAG2GA
Product revision : 0.7
Product serial number : (hex) AD050DC9
Manufacturing date : 05/2012
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFFF8A406063
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : YES
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7659520 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 1581056
Number of sectors : 2867200
Device Manufacturer :samsung
Device Platform :omap4
Build ID :KTU84Q
Display Build ID :merk_p3100-userdebug 4.4.4 KTU84Q eng.santosh.20140806.182830 test-keys
Release ID :4.4.4
Device Model :GT-P3100
Device Name :espressorfxx
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :espressorfxx-user 4.2.2 JDQ39 P3100XWDNA1 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/MAG2GA_26_05_2018_20_10_16.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.6; FW: 1.23.
P00: GPT (00000000, 00002000) 4 MB
P01: EFS (00002000, 0000A000) 20 MB
P02: SBL1 (0000C000, 00001000) 2048 KB
P03: SBL2 (0000D000, 00001000) 2048 KB
P04: PARAM (0000E000, 00004000) 8 MB
P05: KERNEL (00012000, 00004000) 8 MB
P06: RECOVERY (00016000, 00004000) 8 MB
P07: CACHE (0001A000, 0015E000) 700 MB
P08: MODEM (00178000, 0000A000) 20 MB
P09: FACTORYFS (00182000, 002BC000) 1400 MB
P10: DATAFS (0043E000, 0181BFDE) 12.05 GB
P11: HIDDEN (01C59FDE, 00100000) 512 MB
Code:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-P3100
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-P3100_EMMC_M8G2FB.srf
Voltage : 2.0V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present.
