Setting frequence to 21 Mhz
CMD Pullup Level: 1691 mV
CMD Active Level: 1753 mV
EMMC Device Information :
EMMC CID: 90014A483447326211018D5B6A9C2258
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G2b , HEX: 483447326200 , S/N: 8D5B6A9C , rev. 0x01
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H4G2b_8D5B6A9C_20180509_043132.extcsd
EMMC Init completed.
Opening file: J13G.pit
Pit: J13G.pit
Entry count: 29
The size of the last section has been updated
J100HXXU0AOC1_J100HOLB0AOC1_J100HDXU0AOC1_HOME.tar .md5
The list of files in the firmware:
spl.img
sboot.bin
sboot2.bin
param.lfs
boot.img
recovery.img
system.img
sprdcp.img
sprddsp.img
nvitem.bin
cache.img
hidden.img
Setting frequence to 21 Mhz
CMD Pullup Level: 1680 mV
CMD Active Level: 1753 mV
EMMC Device Information :
EMMC CID: 90014A483447326211018D5B6A9C2258
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G2b , HEX: 483447326200 , S/N: 8D5B6A9C , rev. 0x01
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H4G2b_8D5B6A9C_20180509_043214.extcsd
EMMC Init completed.
Operation: Write by vendor (Samsung)
Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #1
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #2
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #3
Too many errors. Writing has been stopped
CMD Pullup Level: 1691 mV
CMD Active Level: 1753 mV
EMMC Device Information :
EMMC CID: 90014A483447326211018D5B6A9C2258
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G2b , HEX: 483447326200 , S/N: 8D5B6A9C , rev. 0x01
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H4G2b_8D5B6A9C_20180509_043132.extcsd
EMMC Init completed.
Opening file: J13G.pit
Pit: J13G.pit
Entry count: 29
The size of the last section has been updated
J100HXXU0AOC1_J100HOLB0AOC1_J100HDXU0AOC1_HOME.tar .md5
The list of files in the firmware:
spl.img
sboot.bin
sboot2.bin
param.lfs
boot.img
recovery.img
system.img
sprdcp.img
sprddsp.img
nvitem.bin
cache.img
hidden.img
Setting frequence to 21 Mhz
CMD Pullup Level: 1680 mV
CMD Active Level: 1753 mV
EMMC Device Information :
EMMC CID: 90014A483447326211018D5B6A9C2258
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G2b , HEX: 483447326200 , S/N: 8D5B6A9C , rev. 0x01
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H4G2b_8D5B6A9C_20180509_043214.extcsd
EMMC Init completed.
Operation: Write by vendor (Samsung)
Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #1
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #2
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #3
Too many errors. Writing has been stopped
