Samsung SM-J100H "dead" boot repair sucess:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J100H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J100H_EMMC_H4G2B.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473262110137290864324B
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 37290864
Manufacturing date : 03/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_01_05_2018_11_49_08.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
Erasing. Please wait... Done.
SW: 1.5.8; FW: 1.23.
No General Purpose Partition 1
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 2
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 3
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 4
enhanced attribute is not set
write reliablity is set
No enhanced user data area
write reliablity is not set
Creating HW partitions succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J100H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J100H_EMMC_H4G2B.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473262110137290864324B
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 37290864
Manufacturing date : 03/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_01_05_2018_11_49_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
Selected pit file: C:/Users/Majub Alli/Desktop/j1/J13G.pit
Open file "C:/Users/Majub Alli/Desktop/j1/SM-J100H/J100HDDS0AQB1_J100HODD0AQA2_J100HDDU0APH1_HOME.tar .md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOT... Done.
Switched to user area.
Writing partition SBOOT... Done.
Writing partition SBOOT2... Done.
Writing partition WDSP... Done.
Writing partition MODEM... Done.
Writing partition KERNEL... Done.
Writing partition RECOVERY... Done.
Writing partition CSC... Done.
Writing partition system... Done.
Writing partition HIDDEN... Done.
Writing is finished.
SW: 1.5.8; FW: 1.23.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J100H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J100H_EMMC_H4G2B.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473262110137290864324B
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 37290864
Manufacturing date : 03/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : e9000000 bytes
Device sector size : 512 bytes
Partition offset : 616448
Number of sectors : 2129920
Device Manufacturer :samsung
Device Platform :sc8830
Build ID :KTU84P
Display Build ID :KTU84P.J100HDDS0AQB1
Release ID :4.4.4
Device Model :SM-J100H
Device Name :j13gxx
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :j13gxx-user 4.4.4 KTU84P J100HDDS0AQB1 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_01_05_2018_11_59_57.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
P00: GPT (00000000, 00002000) 4 MB
P01: sboot (00002000, 00001000) 2048 KB
P02: sboot2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: wdsp (00006000, 00002000) 4 MB
P08: modem (00008000, 00004000) 8 MB
P09: modem2 (0000C000, 00004000) 8 MB
P10: tddsp (00010000, 00002000) 4 MB
P11: fota_sig (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: param (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: reserved2 (00022000, 00000800) 1024 KB
P20: kernel (00022800, 00008000) 16 MB
P21: recovery (0002A800, 00008000) 16 MB
P22: csc (00032800, 00064000) 200 MB
P23: system (00096800, 00208000) 1040 MB
P24: hidden (0029E800, 00014000) 40 MB
P25: userdata (002B2800, 00493800) 2343 MB
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J100H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J100H_EMMC_H4G2B.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473262110137290864324B
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 37290864
Manufacturing date : 03/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_01_05_2018_11_49_08.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
Erasing. Please wait... Done.
SW: 1.5.8; FW: 1.23.
No General Purpose Partition 1
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 2
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 3
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 4
enhanced attribute is not set
write reliablity is set
No enhanced user data area
write reliablity is not set
Creating HW partitions succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J100H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J100H_EMMC_H4G2B.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473262110137290864324B
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 37290864
Manufacturing date : 03/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_01_05_2018_11_49_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
Selected pit file: C:/Users/Majub Alli/Desktop/j1/J13G.pit
Open file "C:/Users/Majub Alli/Desktop/j1/SM-J100H/J100HDDS0AQB1_J100HODD0AQA2_J100HDDU0APH1_HOME.tar .md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOT... Done.
Switched to user area.
Writing partition SBOOT... Done.
Writing partition SBOOT2... Done.
Writing partition WDSP... Done.
Writing partition MODEM... Done.
Writing partition KERNEL... Done.
Writing partition RECOVERY... Done.
Writing partition CSC... Done.
Writing partition system... Done.
Writing partition HIDDEN... Done.
Writing is finished.
SW: 1.5.8; FW: 1.23.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J100H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J100H_EMMC_H4G2B.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473262110137290864324B
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 37290864
Manufacturing date : 03/2015
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : e9000000 bytes
Device sector size : 512 bytes
Partition offset : 616448
Number of sectors : 2129920
Device Manufacturer :samsung
Device Platform :sc8830
Build ID :KTU84P
Display Build ID :KTU84P.J100HDDS0AQB1
Release ID :4.4.4
Device Model :SM-J100H
Device Name :j13gxx
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :j13gxx-user 4.4.4 KTU84P J100HDDS0AQB1 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_01_05_2018_11_59_57.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
P00: GPT (00000000, 00002000) 4 MB
P01: sboot (00002000, 00001000) 2048 KB
P02: sboot2 (00003000, 00001000) 2048 KB
P03: wfixnv1 (00004000, 00000800) 1024 KB
P04: wfixnv2 (00004800, 00000800) 1024 KB
P05: tdfixnv1 (00005000, 00000800) 1024 KB
P06: tdfixnv2 (00005800, 00000800) 1024 KB
P07: wdsp (00006000, 00002000) 4 MB
P08: modem (00008000, 00004000) 8 MB
P09: modem2 (0000C000, 00004000) 8 MB
P10: tddsp (00010000, 00002000) 4 MB
P11: fota_sig (00012000, 00000800) 1024 KB
P12: wruntimenv1 (00012800, 00000800) 1024 KB
P13: wruntimenv2 (00013000, 00000800) 1024 KB
P14: tdruntimenv1 (00013800, 00000800) 1024 KB
P15: tdruntimenv2 (00014000, 00000800) 1024 KB
P16: param (00014800, 00001000) 2048 KB
P17: efs (00015800, 0000A000) 20 MB
P18: prodnv (0001F800, 00002800) 5 MB
P19: reserved2 (00022000, 00000800) 1024 KB
P20: kernel (00022800, 00008000) 16 MB
P21: recovery (0002A800, 00008000) 16 MB
P22: csc (00032800, 00064000) 200 MB
P23: system (00096800, 00208000) 1040 MB
P24: hidden (0029E800, 00014000) 40 MB
P25: userdata (002B2800, 00493800) 2343 MB
Disconnected.
