Samsung SM-G5352G
No power recovered by medusa pro box factory repair option.
Thanks tam.
No power recovered by medusa pro box factory repair option.
Thanks tam.
Code:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G532G
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A4838473475920116843093B413
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 16843093
Manufacturing date : 11/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u_29_05_2018_21_30_04.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.0; FW: 1.23.
Smart report info:
Hash code: 0000000000000000000000000000000000000000000000000000000000000000
Super block size : 0x00000000 Bytes
Super page size : 0x00000000 Bytes
Optima write size : 0x00000000 Bytes
Number of banks : 0
Bank0 init bad block : 0
Bank0 runtime bad block : 0
Bank0 remain reserved block : 0
Max erase count : 0
Min erase count : 0
Avg erase count : 0
Read reclaim count : 0
Optimal trim size : 0x00000000 Bytes
Max erase count (SCL) : 0
Min erase count (SCL) : 0
Avg erase count (SCL) : 0
Max erase count (MLC) : 0
Min erase count (MLC) : 0
Avg erase count (MLC) : 0
SW: 1.6.0; FW: 1.23.
Partition table was not found.
Partition table was not found.
Code:
Selected pit file: G:/SM-G532G_17-5-2018_21-10-26.pit
Open file "G:/G532GDDU1AQC5_OWN1BQC5/BL_G532GDDU1AQC5_CL10885671_QB12835377_REV00_user_low_ship_MULTI_CERT.tar.md5".
Open file "G:/G532GDDU1AQC5_OWN1BQC5/AP_G532GDDU1AQC5_CL10885671_QB12835377_REV00_user_low_ship_MULTI_CERT.tar.md5".
Open file "G:/G532GDDU1AQC5_OWN1BQC5/CP_G532GDDU1AQC1_NOT_DEFINE_CL478496_QB5910556.tar.md5".
Open file "G:/G532GDDU1AQC5_OWN1BQC5/CSC_OWN_G532GOWN1BQC5_CL10885671_QB12835377_REV00_user_low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOTLOADER... Done.
Switched to user area.
Writing partition lk... Done.
Writing partition secro... Done.
Writing partition efuse... Done.
Writing partition tee1... Done.
Writing partition PARAM... Done.
Writing partition recovery... Done.
Writing partition boot... Done.
Writing partition md1img... Done.
Writing partition md1dsp... Done.
Writing partition system... Done.
Writing partition cache... Done.
Writing partition hidden... Done.
Writing partition userdata... Done.
Writing is finished.
SW: 1.6.0; FW: 1.23.
