UNLOCK INSTRUCTIONS:
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Unlock
Selected model: SM-G965U
Software version: 32.1
Checking Login and Password... OK
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G965U
Android version: 8.0.0
PDA version: G965USQU1ARBG
CSC version: G965UOYN1ARBG
Phone version: G965USQU1ARBG
Product code: SM-G965UZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28K32MVT0V
IMEI: 353322091693144
HW version: REV1.1
RF cal date: 2018.03.17
Chip name: SDM845
Modem board: SDM845
Security patch: 2018-02-01
Boot Warranty bit: 0
Searching Samsung diag port... not found
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM16 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.32.1
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Unlock
Selected model: SM-G965U
Software version: 32.1
Checking Login and Password... OK
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G965U
Android version: 8.0.0
PDA version: G965USQU1ARBG
CSC version: G965UOYN1ARBG
Phone version: G965USQU1ARBG
Product code: SM-G965UZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28K32MVT0V
IMEI: 353322091693144
HW version: REV1.1
RF cal date: 2018.03.17
Chip name: SDM845
Modem board: SDM845
Security patch: 2018-02-01
Boot Warranty bit: 0
Searching Samsung diag port... not found
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM16 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.32.1
