Hi,
Getting this error on XT1068 Smart Repair....
After Removing Check On "Write Data Verification"
Smart Repair Done But Phone Still Stuck On Qualcomm 9008 Mode..
Is it EMMC problem or anything can be done about it...?
Getting this error on XT1068 Smart Repair....
Code:
Welcome to Medusa Pro Software version 1.5.9.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Motorola
Model : xt1068 8gb
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/MOTOROLA_XT1068_8GB_(TEST)_THANKS_TO_MR_CBCELULAR.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC VYL00M
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 15010056594C30304D1992D60CD78E03
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : VYL00M
Product revision : 1.9
Product serial number : (hex) 92D60CD7
Manufacturing date : 08/2011
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 512 Kbytes
Boot2 size : 512 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7340032 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/VYL00M_14_05_2018_11_02_33.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.9; FW: 1.23.
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/MOTOROLA_XT1068_8GB_(TEST)_THANKS_TO_MR_CBCELULAR.srf".
Write data verification is enabled.
Switch error!!!
Writing BOOT1 partition...
Write verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
Please disconnect battery and USB cable.
Code:
Model Settings:
Interface : eMMC
Brand : Motorola
Model : xt1068 8gb
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/MOTOROLA_XT1068_8GB_(TEST)_THANKS_TO_MR_CBCELULAR.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC VYL00M
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 15010056594C30304D1992D60CD78E03
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : VYL00M
Product revision : 1.9
Product serial number : (hex) 92D60CD7
Manufacturing date : 08/2011
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8A404067
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 512 Kbytes
Boot2 size : 512 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7340032 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/VYL00M_14_05_2018_11_06_54.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.9; FW: 1.23.
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/MOTOROLA_XT1068_8GB_(TEST)_THANKS_TO_MR_CBCELULAR.srf".
Write data verification is disabled.
Switch error!!!
Writing BOOT1 partition...
ERROR[012]: Write error.
At sector 0
Attempting to write...
Done.
Switched to boot area partition 2.
Writing BOOT2 partition... Done.
Switched to user area.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing DDR partition... Done.
Writing aboot partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing sdi partition... Done.
Writing utags partition... Done.
Writing logs partition... Done.
Writing padA partition... Done.
Writing abootBackup partition... Done.
Writing rpmBackup partition... Done.
Writing tzBackup partition... Done.
Writing sdiBackup partition... Done.
Writing utagsBackup partition... Done.
Writing padB partition... Done.
Writing hob partition... Done.
Writing dhob partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing sp partition... Done.
Writing cid partition... Done.
Writing pds partition... Done.
Writing logo partition... Done.
Writing clogo partition... Done.
Writing persist partition... Done.
Writing misc partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing deviceinfo partition... Done.
Writing ftmlog partition... Done.
Writing kpan partition... Done.
Smart Repair is successfully complete.
SW: 1.5.9; FW: 1.23.
Disconnected.
Is it EMMC problem or anything can be done about it...?
