Welcome to Medusa Pro Software version 1.5.5.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: Alcor Micro USB Smart Card Reader 2
Reader #3: Alcor Micro USB Smart Card Reader 3
Reader #4: FT SCR2000 0
Downloaded and installed file C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 3.0V
Bus Mode : 1 bit
Bus speed : 8 MHz
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A41FD470935431
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.4
Product serial number : (hex) 1FD47093
Manufacturing date : 05/2001
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 0 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/HAG4a2_05_06_2018_17_10_53.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: Alcor Micro USB Smart Card Reader 2
Reader #3: Alcor Micro USB Smart Card Reader 3
Reader #4: FT SCR2000 0
Downloaded and installed file C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 3.0V
Bus Mode : 1 bit
Bus speed : 8 MHz
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A41FD470935431
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.4
Product serial number : (hex) 1FD47093
Manufacturing date : 05/2001
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 0 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/HAG4a2_05_06_2018_17_10_53.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.5; FW: 1.23.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Partition table was not found.
Partition table was not found.
