Code:
Welcome to Medusa Pro Software version 1.6.0.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: FT SCR2000 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE63MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514536334D42035685CEC1A411
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE63MB
Product revision : 0.3
Product serial number : (hex) 5685CEC1
Manufacturing date : 10/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 2424832
Number of sectors : 7077888
Device Manufacturer :motorola
Device Platform :msm8937
Build ID :NCQS26.69-64-2
Release ID :7.1.1
Device Model :Moto E (4)
Device Name :sperry_sprint
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_02_06_2018_20_20_33.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.0; FW: 1.23.
P00: GPT (00000000, 00000100) 128 KB
P01: sbl1 (00000100, 00000400) 512 KB
P02: rpm (00000500, 00000200) 256 KB
P03: tz (00000900, 00000E00) 1792 KB
P04: devcfg (00001900, 00000100) 128 KB
P05: aboot (00001B00, 00000C00) 1536 KB
P06: cmnlib (00002700, 00000200) 256 KB
P07: cmnlib64 (00002900, 00000200) 256 KB
P08: keymaster (00002B00, 00000200) 256 KB
P09: prov (00002D00, 00000180) 192 KB
P10: sbl1bak (00002F00, 00000400) 512 KB
P11: rpmbak (00003300, 00000200) 256 KB
P12: tzbak (00003700, 00000E00) 1792 KB
P13: devcfgbak (00004700, 00000100) 128 KB
P14: abootbak (00004900, 00000C00) 1536 KB
P15: cmnlibbak (00005500, 00000200) 256 KB
P16: cmnlib64bak (00005700, 00000200) 256 KB
P17: keymasterbak (00005900, 00000200) 256 KB
P18: provbak (00005B00, 00000180) 192 KB
P19: modem (00005D00, 00032000) 100 MB
P20: fsc (00037D00, 00000002) 1024 b
P21: ssd (00037D02, 00000010) 8 KB
P22: dsp (00037D12, 00008000) 16 MB
P23: DDR (0003FE00, 00000040) 32 KB
P24: sec (0003FE40, 00000020) 16 KB
P25: utags (0003FF00, 00000400) 512 KB
P26: utagsBackup (00040300, 00000400) 512 KB
P27: modemst1 (00040700, 00001000) 2048 KB
P28: modemst2 (00041700, 00001000) 2048 KB
P29: fsg (00042700, 00004000) 8 MB
P30: persist (00046700, 00010000) 32 MB
P31: frp (00056700, 00000400) 512 KB
P32: cid (00056B00, 00000100) 128 KB
P33: logo (00056C00, 00008000) 16 MB
P34: carrier (0005EC00, 00008000) 16 MB
P35: metadata (00066C00, 00000400) 512 KB
P36: kpan (00067000, 00004000) 8 MB
P37: boot (0006B000, 00008000) 16 MB
P38: recovery (00073000, 000080C8) 16.1 MB
P39: misc (0007B100, 00000800) 1024 KB
P40: limits (0007B900, 00000040) 32 KB
P41: mota (0007BA00, 00000400) 512 KB
P42: dip (0007BE00, 00000800) 1024 KB
P43: syscfg (0007C600, 00000400) 512 KB
P44: logs (0007CA00, 00001000) 2048 KB
P45: apdp (0007DA00, 00000200) 256 KB
P46: msadp (0007DC00, 00000200) 256 KB
P47: dpo (0007DE00, 00000010) 8 KB
P48: padA (0007DF00, 00002100) 4.125 MB
P49: sp (00080000, 00004000) 8 MB
P50: hw (00084000, 00004000) 8 MB
P51: oem (00088000, 00148000) 656 MB
P52: cache (001D0000, 00080000) 256 MB
P53: system (00250000, 006C0000) 3456 MB
P54: userdata (00910000, 0140EFDF) 10.03 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_Gpt_0x0_0x100_02_06_2018_20_20_33.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.0; FW: 1.23.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_Cid_0x56b00_0x100_02_06_2018_20_20_33.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.0; FW: 1.23.
Switched to boot area partition 1.
Opening D:/MAIN/MOTO DUMP/XT1766 1GB Moto_E_(4)(-7.1.1-NCQS26.69-64-2)[KMQE60013M-B318_7C02D888]/boot1.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.0; FW: 1.23.
Switched to boot area partition 2.
Opening D:/MAIN/MOTO DUMP/XT1766 1GB Moto_E_(4)(-7.1.1-NCQS26.69-64-2)[KMQE60013M-B318_7C02D888]/boot2.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.0; FW: 1.23.
Switched to user area.
Opening D:/MAIN/MOTO DUMP/XT1766 1GB Moto_E_(4)(-7.1.1-NCQS26.69-64-2)[KMQE60013M-B318_7C02D888]/userarea.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.0; FW: 1.23.
