Hi,
Again, Reset FRP UFS in Z3X box, So to let all other know the steps ( very easy ):
1- Power off your phone.
2- open Z3X Samsung Tool Pro => then select SM-G935F from the mobile list.
3- Move to Unlock menu
4- connect your mobile to the Z3x box by UART cable ( same as photo )
5- Hold 'Vol down' by your hand
6- Click Reset FRP UFS button => then click power button for 3 sec.
7- you will see that your FRP removed.
8- After that go to download mode and click remove the pattern and it's done
If the post help you, Don't forget to click thanks.
Again, Reset FRP UFS in Z3X box, So to let all other know the steps ( very easy ):
1- Power off your phone.
2- open Z3X Samsung Tool Pro => then select SM-G935F from the mobile list.
3- Move to Unlock menu
4- connect your mobile to the Z3x box by UART cable ( same as photo )
5- Hold 'Vol down' by your hand
6- Click Reset FRP UFS button => then click power button for 3 sec.
7- you will see that your FRP removed.
8- After that go to download mode and click remove the pattern and it's done
Quote:
|
Operation: Reset Pattern Lock Selected model: SM-G925I Selected port: COM6 USB Serial Port Software version: 32.6 Checking local file... OK Searching server... OK Compare local and server file... OK (up to date) Searching USB Flash interface... COM4 detected Setup connection... OK Reading data from phone... OK Sending data to phone... OK Sending data to phone... OK Waiting ADB device... OK Reading phone info... Recovery build version: 6.0.1 Boot version: G925IDVU3EPF4 Platform: exynos7420 Boot serial: 05157df529884c20 Product board: zerolte Erasing locks... OK Rebooting phone... OK Reset locks done Done with Samsung Tool PRO v.32.6 |
If the post help you, Don't forget to click thanks.
