UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G935U
Software version: 32.4
Checking Login and Password... OK
Ballance: 35 crd.
You have 35 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G935U
Android version: 7.0
PDA version: G935UUEU4BRD1
CSC version: G935UOYM4BRD1
Phone version: G935UUEU4BRD1
Product code: SM-G935TZSATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: RF8H31VZJ8X
IMEI: 357751071284886
HW version: REV0.7
RF cal date: 2016.03.16
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-04-01
Boot Warranty bit: 0
This phone may be locked to TMB and may not unlock via codes Continue? Yes
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM15 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 51485368
NET lock: 14153041
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.32.4
[IMG]
[/IMG]
Note Only Me I Found The Same problem as Me Here
http://forum.gsmhosting.com/vbb/f453...arged-2382325/
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G935U
Software version: 32.4
Checking Login and Password... OK
Ballance: 35 crd.
You have 35 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G935U
Android version: 7.0
PDA version: G935UUEU4BRD1
CSC version: G935UOYM4BRD1
Phone version: G935UUEU4BRD1
Product code: SM-G935TZSATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: RF8H31VZJ8X
IMEI: 357751071284886
HW version: REV0.7
RF cal date: 2016.03.16
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-04-01
Boot Warranty bit: 0
This phone may be locked to TMB and may not unlock via codes Continue? Yes
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM15 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 51485368
NET lock: 14153041
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.32.4
[IMG]
[/IMG]Note Only Me I Found The Same problem as Me Here
http://forum.gsmhosting.com/vbb/f453...arged-2382325/
