HTC Desire 510 Smart repair successfully done !

Model Settings:
Interface : eMMC
Brand : HTC
Model : Desire_510(OPCV200)
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/HTC_DESIRE_510(OPCV200)_EMMC_H8G2D.srf
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : 1 MHz

Connecting...
Device : Hynix eMMC H8G2d
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID : 90014A4838473264040503A22FDA5287
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G2d
Product revision : 0.5
Product serial number : (hex) 3A22FDA
Manufacturing date : 05/2015
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H8G2d_11_07_2018_09_15_21.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/HTC_DESIRE_510(OPCV200)_EMMC_H8G2D.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing pg1fs partition... Done.
Writing board_info partition... Done.
Writing reserve_1 partition... Done.
Writing mfg partition... Done.
Writing pg2fs partition... Done.
Writing sbl1_update partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing sdi partition... Done.
Writing hboot partition... Done.
Writing sp1 partition... Done.
Writing hyp partition... Done.
Writing wifi partition... Done.
Writing ddr partition... Done.
Writing dsps partition... Done.
Writing wcnss partition... Done.
Writing rfg_0 partition... Done.
Writing rfg_1 partition... Done.
Writing rfg_2 partition... Done.
Writing rfg_3 partition... Done.
Writing rfg_4 partition... Done.
Writing rfg_5 partition... Done.
Writing rfg_6 partition... Done.
Writing rfg_7 partition... Done.
Writing fsg partition... Done.
Writing radio partition... Done.
Writing tool_diag partition... Done.
Writing reserve_2 partition... Done.
Writing misc partition... Done.
Writing modem_st1 partition... Done.
Writing modem_st2 partition... Done.
Writing fataldevlog partition... Done.
Writing debug_config partition... Done.
Writing pdata partition... Done.
Writing control partition... Done.
Writing local partition... Done.
Writing extra partition... Done.
Writing cdma_record partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing skylink partition... Done.
Writing carrier partition... Done.
Writing devlog partition... Done.
Writing backup_hboot partition... Done.
Writing reserve partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.

Smart Repair is successfully complete.
SW: 1.6.2; FW: 1.24.
Disconnected.