Huawei P20 CLT-L29 FRP

Huawei P20 CLT-L29 FRP remove DONE

Select "Android ADB" platform from the tab menu in the upper left side of the software.
Go to "HiSilicon" tab, if you have HiSilicon-based phone. Or go to Qualcomm tab, if your phone is Qualcomm-based.
Turn the phone ON and connect it to PC with the USB cable.
Select “Android ADB interface” port.
Press “Remove FRP” button.
The phone will ask to confirm RSA key fingerprint.
If phone is not asking for RSA key fingerprint:
Cancel the Remove FRP operation.
Reboot the phone manually.
Run the Remove FRP operation once again.
The message "Removing FRP… Done" indicates that procedure has been completed successfully.
Disconnect the phone.
Reboot the phone.
Perform Master Reset from the phone menu.


713180162 Sigma dongle 2.28, Initializing...OK
--------- 2018-07-29 19:19:46 ---------
SigmaKey 2.28.05 ADB: Remove FRP
^ Android Composite ADB Interface
Phone model: HUAWEI CLT-L29
Android 8.1.0; Firmware: HUAWEICLT-L29; Date: Wed Mar 7 03:58:08 CST 2018
Version: CLT-L29 8.1.0.106(C636)
Baseband Firmware: 21C20B353S000C000,21C20B353S000C000
Removing FRP lock....Done