i have dump csd or unbrick samsung sm_c7000
thanks for your support
this is log
Welcome to Medusa Pro Software version 1.6.2.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Reader #3: FT SCR2000 1
Reader #4: Gemalto e-gate Smart Card 0
Reader #5: Gemalto e-gate Smart Card 2
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 1084254755
Size : 517.01 GB (529421.27 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Erase block size : 98304 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : (0xE3) 11100011
Boot partition enable :
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x40) 01000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x8000000) 128 MB
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_41_09.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_42_03.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
Please select file.
Selected pit file: C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/C7LTE_CHN_OPEN.pit
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/BL_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Writing MBR...
ERROR[012]: Write error.
At sector 0.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 688128
Number of sectors : 7372800
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :MMB29M
Display Build ID :MMB29M.C7000ZHU2AQF2
Release ID :6.0.1
Device Model :SM-C7000
Device Name :c7ltezh
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7ltezh-user 6.0.1 MMB29M C7000ZHU2AQF2 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_43_34.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: persdata (000A0000, 00006000) 12 MB
P37: reserved2 (000A6000, 00002000) 4 MB
P38: system (000A8000, 00708000) 3600 MB
P39: cache (007B0000, 00064000) 200 MB
P40: userdata (00814000, 03229FD8) 25.08 GB
Backuping FRP data...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x56000_0x800_09_07_2018_16_43_47.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.2; FW: 1.24.
Removing FRP. Please wait... Done.
SW: 1.6.2; FW: 1.24.
Selected pit file: C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/C7LTE_CHN_OPEN.pit
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/BL_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition SBL1... Done.
Writing partition RPM... Done.
Writing partition TZ... Done.
Writing partition ABOOT... Done.
Writing partition SEC... Done.
Writing partition LKSECAPP... Done.
Writing partition KEYMASTER... Done.
Writing partition CMNLIB... Done.
Writing partition DEVCFG... Done.
Writing partition APDP... Done.
Writing partition MSADP... Done.
Writing partition APNHLOS... Done.
Writing is finished.
SW: 1.6.2; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 688128
Number of sectors : 7372800
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :MMB29M
Display Build ID :MMB29M.C7000ZHU2AQF2
Release ID :6.0.1
Device Model :SM-C7000
Device Name :c7ltezh
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7ltezh-user 6.0.1 MMB29M C7000ZHU2AQF2 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_47_38.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: persdata (000A0000, 00006000) 12 MB
P37: reserved2 (000A6000, 00002000) 4 MB
P38: system (000A8000, 00708000) 3600 MB
P39: cache (007B0000, 00064000) 200 MB
P40: userdata (00814000, 03228000) 25.08 GB
Selected pit file: C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/C7LTE_CHN_OPEN.pit
Open file "C:/Users/LuigiCell/Downloads/SM-C7000_1_20170619191926_ltcxvawtx4_fac/BL_C7000ZHU2AQF2_CL11552381_QB13829598_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition SBL1... Done.
Writing partition RPM... Done.
Writing partition TZ... Done.
Writing partition ABOOT... Done.
Writing partition SEC... Done.
Writing partition LKSECAPP... Done.
Writing partition KEYMASTER... Done.
Writing partition CMNLIB... Done.
Writing partition DEVCFG... Done.
Writing partition APDP... Done.
Writing partition MSADP... Done.
Writing partition APNHLOS... Done.
Writing is finished.
SW: 1.6.2; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 688128
Number of sectors : 7372800
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :MMB29M
Display Build ID :MMB29M.C7000ZHU2AQF2
Release ID :6.0.1
Device Model :SM-C7000
Device Name :c7ltezh
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7ltezh-user 6.0.1 MMB29M C7000ZHU2AQF2 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_49_50.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: persdata (000A0000, 00006000) 12 MB
P37: reserved2 (000A6000, 00002000) 4 MB
P38: system (000A8000, 00708000) 3600 MB
P39: cache (007B0000, 00064000) 200 MB
P40: userdata (00814000, 03228000) 25.08 GB
Writing EXT_CSD succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 688128
Number of sectors : 7372800
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :MMB29M
Display Build ID :MMB29M.C7000ZHU2AQF2
Release ID :6.0.1
Device Model :SM-C7000
Device Name :c7ltezh
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7ltezh-user 6.0.1 MMB29M C7000ZHU2AQF2 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_50_38.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: persdata (000A0000, 00006000) 12 MB
P37: reserved2 (000A6000, 00002000) 4 MB
P38: system (000A8000, 00708000) 3600 MB
P39: cache (007B0000, 00064000) 200 MB
P40: userdata (00814000, 03228000) 25.08 GB
Selected pit file: C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/C7LTE_CHN_OPEN.pit
Open file "C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/BL_C7000ZHU2BRB1_CL12482124_QB16813859_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition SBL1... Done.
Writing partition RPM... Done.
Writing partition TZ... Done.
Writing partition ABOOT... Done.
Writing partition SEC... Done.
Writing partition LKSECAPP... Done.
Writing partition KEYMASTER... Done.
Writing partition CMNLIB... Done.
Writing partition DEVCFG... Done.
Writing partition APDP... Done.
Writing partition MSADP... Done.
Writing partition APNHLOS... Done.
Writing is finished.
SW: 1.6.2; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 688128
Number of sectors : 7372800
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :MMB29M
Display Build ID :MMB29M.C7000ZHU2AQF2
Release ID :6.0.1
Device Model :SM-C7000
Device Name :c7ltezh
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7ltezh-user 6.0.1 MMB29M C7000ZHU2AQF2 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_56_14.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: persdata (000A0000, 00006000) 12 MB
P37: reserved2 (000A6000, 00002000) 4 MB
P38: system (000A8000, 00708000) 3600 MB
P39: cache (007B0000, 00064000) 200 MB
P40: userdata (00814000, 03228000) 25.08 GB
Selected pit file: C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/C7LTE_CHN_OPEN.pit
Selected pit file: C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/BL_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT.tar.md5
Unknown format of input file C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/BL_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT.tar.md5!
Selected pit file: C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/C7LTE_CHN_OPEN.pit
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/BL_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/AP_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT_meta.tar.md5".
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/CP_C7000ZCU2BRB1_CP8794044_CL12482825_QB16812211_R EV00_user_low_ship_MULTI_CERT.tar.md5".
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/CSC_CHC_C7000CHC2BRB1_CL12482825_QB16812211_REV00_ user_low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is disabled.
Writing. Please wait...
Writing partition SBL1... Done.
Writing partition RPM... Done.
Writing partition TZ... Done.
Writing partition ABOOT... Done.
Writing partition SEC... Done.
Writing partition LKSECAPP... Done.
Writing partition KEYMASTER... Done.
Writing partition CMNLIB... Done.
Writing partition DEVCFG... Done.
Writing partition APDP... Done.
Writing partition MSADP... Done.
Writing partition BOOT... Done.
Writing partition RECOVERY... Done.
Writing partition PERSIST... Done.
Writing partition DSP... Done.
Writing partition MODEM... Done.
Writing partition APNHLOS... Done.
Writing partition SYSTEM... Done.
Writing partition CACHE... Done.
Writing is finished.
SW: 1.6.2; FW: 1.24.
thanks for your support
this is log
Welcome to Medusa Pro Software version 1.6.2.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Reader #3: FT SCR2000 1
Reader #4: Gemalto e-gate Smart Card 0
Reader #5: Gemalto e-gate Smart Card 2
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 1084254755
Size : 517.01 GB (529421.27 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Erase block size : 98304 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : (0xE3) 11100011
Boot partition enable :
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x40) 01000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x8000000) 128 MB
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_41_09.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_42_03.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
Please select file.
Selected pit file: C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/C7LTE_CHN_OPEN.pit
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/BL_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Writing MBR...
ERROR[012]: Write error.
At sector 0.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 688128
Number of sectors : 7372800
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :MMB29M
Display Build ID :MMB29M.C7000ZHU2AQF2
Release ID :6.0.1
Device Model :SM-C7000
Device Name :c7ltezh
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7ltezh-user 6.0.1 MMB29M C7000ZHU2AQF2 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_43_34.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: persdata (000A0000, 00006000) 12 MB
P37: reserved2 (000A6000, 00002000) 4 MB
P38: system (000A8000, 00708000) 3600 MB
P39: cache (007B0000, 00064000) 200 MB
P40: userdata (00814000, 03229FD8) 25.08 GB
Backuping FRP data...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x56000_0x800_09_07_2018_16_43_47.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.2; FW: 1.24.
Removing FRP. Please wait... Done.
SW: 1.6.2; FW: 1.24.
Selected pit file: C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/C7LTE_CHN_OPEN.pit
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/BL_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition SBL1... Done.
Writing partition RPM... Done.
Writing partition TZ... Done.
Writing partition ABOOT... Done.
Writing partition SEC... Done.
Writing partition LKSECAPP... Done.
Writing partition KEYMASTER... Done.
Writing partition CMNLIB... Done.
Writing partition DEVCFG... Done.
Writing partition APDP... Done.
Writing partition MSADP... Done.
Writing partition APNHLOS... Done.
Writing is finished.
SW: 1.6.2; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 688128
Number of sectors : 7372800
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :MMB29M
Display Build ID :MMB29M.C7000ZHU2AQF2
Release ID :6.0.1
Device Model :SM-C7000
Device Name :c7ltezh
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7ltezh-user 6.0.1 MMB29M C7000ZHU2AQF2 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_47_38.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: persdata (000A0000, 00006000) 12 MB
P37: reserved2 (000A6000, 00002000) 4 MB
P38: system (000A8000, 00708000) 3600 MB
P39: cache (007B0000, 00064000) 200 MB
P40: userdata (00814000, 03228000) 25.08 GB
Selected pit file: C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/C7LTE_CHN_OPEN.pit
Open file "C:/Users/LuigiCell/Downloads/SM-C7000_1_20170619191926_ltcxvawtx4_fac/BL_C7000ZHU2AQF2_CL11552381_QB13829598_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition SBL1... Done.
Writing partition RPM... Done.
Writing partition TZ... Done.
Writing partition ABOOT... Done.
Writing partition SEC... Done.
Writing partition LKSECAPP... Done.
Writing partition KEYMASTER... Done.
Writing partition CMNLIB... Done.
Writing partition DEVCFG... Done.
Writing partition APDP... Done.
Writing partition MSADP... Done.
Writing partition APNHLOS... Done.
Writing is finished.
SW: 1.6.2; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 688128
Number of sectors : 7372800
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :MMB29M
Display Build ID :MMB29M.C7000ZHU2AQF2
Release ID :6.0.1
Device Model :SM-C7000
Device Name :c7ltezh
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7ltezh-user 6.0.1 MMB29M C7000ZHU2AQF2 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_49_50.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: persdata (000A0000, 00006000) 12 MB
P37: reserved2 (000A6000, 00002000) 4 MB
P38: system (000A8000, 00708000) 3600 MB
P39: cache (007B0000, 00064000) 200 MB
P40: userdata (00814000, 03228000) 25.08 GB
Writing EXT_CSD succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 688128
Number of sectors : 7372800
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :MMB29M
Display Build ID :MMB29M.C7000ZHU2AQF2
Release ID :6.0.1
Device Model :SM-C7000
Device Name :c7ltezh
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7ltezh-user 6.0.1 MMB29M C7000ZHU2AQF2 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_50_38.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: persdata (000A0000, 00006000) 12 MB
P37: reserved2 (000A6000, 00002000) 4 MB
P38: system (000A8000, 00708000) 3600 MB
P39: cache (007B0000, 00064000) 200 MB
P40: userdata (00814000, 03228000) 25.08 GB
Selected pit file: C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/C7LTE_CHN_OPEN.pit
Open file "C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/BL_C7000ZHU2BRB1_CL12482124_QB16813859_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition SBL1... Done.
Writing partition RPM... Done.
Writing partition TZ... Done.
Writing partition ABOOT... Done.
Writing partition SEC... Done.
Writing partition LKSECAPP... Done.
Writing partition KEYMASTER... Done.
Writing partition CMNLIB... Done.
Writing partition DEVCFG... Done.
Writing partition APDP... Done.
Writing partition MSADP... Done.
Writing partition APNHLOS... Done.
Writing is finished.
SW: 1.6.2; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42008966DC5E2489
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 8966DC5E
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 688128
Number of sectors : 7372800
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :MMB29M
Display Build ID :MMB29M.C7000ZHU2AQF2
Release ID :6.0.1
Device Model :SM-C7000
Device Name :c7ltezh
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7ltezh-user 6.0.1 MMB29M C7000ZHU2AQF2 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RX14MB_09_07_2018_16_56_14.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: persdata (000A0000, 00006000) 12 MB
P37: reserved2 (000A6000, 00002000) 4 MB
P38: system (000A8000, 00708000) 3600 MB
P39: cache (007B0000, 00064000) 200 MB
P40: userdata (00814000, 03228000) 25.08 GB
Selected pit file: C:/Users/LuigiCell/Downloads/SM-C7000_2_20180212185140_nxmzjqxym3_fac/C7LTE_CHN_OPEN.pit
Selected pit file: C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/BL_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT.tar.md5
Unknown format of input file C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/BL_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT.tar.md5!
Selected pit file: C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/C7LTE_CHN_OPEN.pit
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/BL_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/AP_C7000ZCU2BRB1_CL12482825_QB16812211_REV00_user_ low_ship_MULTI_CERT_meta.tar.md5".
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/CP_C7000ZCU2BRB1_CP8794044_CL12482825_QB16812211_R EV00_user_low_ship_MULTI_CERT.tar.md5".
Open file "C:/Users/LuigiCell/Downloads/C7000ZCU2BRB1_C7000CHC2BRB1_CHC_7.0_5File/C7000ZCU2BRB1_C7000CHC2BRB1_CHC/CSC_CHC_C7000CHC2BRB1_CL12482825_QB16812211_REV00_ user_low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is disabled.
Writing. Please wait...
Writing partition SBL1... Done.
Writing partition RPM... Done.
Writing partition TZ... Done.
Writing partition ABOOT... Done.
Writing partition SEC... Done.
Writing partition LKSECAPP... Done.
Writing partition KEYMASTER... Done.
Writing partition CMNLIB... Done.
Writing partition DEVCFG... Done.
Writing partition APDP... Done.
Writing partition MSADP... Done.
Writing partition BOOT... Done.
Writing partition RECOVERY... Done.
Writing partition PERSIST... Done.
Writing partition DSP... Done.
Writing partition MODEM... Done.
Writing partition APNHLOS... Done.
Writing partition SYSTEM... Done.
Writing partition CACHE... Done.
Writing is finished.
SW: 1.6.2; FW: 1.24.
