N950U PLZ REFUND 10 LOG
PHONE USE 20 LOG
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Unlocking using Server:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Unlock
Selected model: SM-N950U
Selected port: COM6 Z3X BOX Serial Port
Software version: 33.2
Checking Login and Password... OK
Ballance: 20 crd.
You have 20 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 8.0.0
PDA version: N950USQS4CRE1
CSC version: N950UOYN4CRE1
Phone version: N950USQS4CRE1
Product code: SM-N950UZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28J91QFXEM
IMEI: 358505082482239
HW version: REV1.0
RF cal date: 2017.09.14
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-05-01
Boot Warranty bit: 0
Searching Samsung diag port... detected COM56
Reading phone info... OK
Reading data from phone... error (0), skip
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM4 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.33.2
PHONE USE 20 LOG
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Unlocking using Server:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Unlock
Selected model: SM-N950U
Selected port: COM6 Z3X BOX Serial Port
Software version: 33.2
Checking Login and Password... OK
Ballance: 20 crd.
You have 20 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N950U
Android version: 8.0.0
PDA version: N950USQS4CRE1
CSC version: N950UOYN4CRE1
Phone version: N950USQS4CRE1
Product code: SM-N950UZKATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28J91QFXEM
IMEI: 358505082482239
HW version: REV1.0
RF cal date: 2017.09.14
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-05-01
Boot Warranty bit: 0
Searching Samsung diag port... detected COM56
Reading phone info... OK
Reading data from phone... error (0), skip
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM4 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.33.2
