Code:
{ white-space: pre-wrap; }
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473164040500A1545871D3
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex) A15458
Manufacturing date : 07/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G1d_19_07_2018_16_55_02.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.3; FW: 1.24.
Code:
Selected scatter file: C:/Users/Tapas/Desktop/Oppo_R2001_11_A.17_160504/Oppo_R2001_11_A.17_160504/Firmware/MT6582_Android_scatter_4G.txt. Scatter file type 2.
Opened input file: C:/Users/Tapas/Desktop/Oppo_R2001_11_A.17_160504/Oppo_R2001_11_A.17_160504/Firmware/preloader_OPPO82_13081.bin
Found 4 eMMC supported CID:
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : H4G1d
eMMC CID : 90014A483447316404
eMMC Vendor ID : 11 (Toshiba eMMC)
eMMC Model ID : 0001
eMMC Name : 004G90
eMMC CID : 110100303034473930
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : H8G2d
eMMC CID : 90014A483847326404
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : H8G1e
eMMC CID : 90014A483847316505
Please select file.
Writing. Please wait...
Write data verification is enabled.
Writing partition PRELOADER... Write data verification is enabled.
Done.
Writing partition MBR... Done.
Writing partition EBR1...
ERROR[012]: Write error.
At sector 1024
Disconnected.
Dear Medusa Team Plz Help Me...
