hello sir i have unlock sm-g935u phone ask unlock code i put unlock code
unlock success but still invalid sim
here is proof
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G935U
Selected port: COM21 Z3X BOX Serial Port
Software version: 33.2
Checking Login and Password... OK
Ballance: 45 crd.
You have 45 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G935U
Android version: 7.0
PDA version: G935UUEU4BQD2
CSC version: G935UOYM4BQD2
Phone version: G935UUEU4BQD2
Product code: SM-G935TZSATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: RF8H21PDEQR
IMEI: 35775107048xxxxx
HW version: REV0.7
RF cal date: 2016.02.22
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2017-04-01
Boot Warranty bit: 0
This phone may be locked to TMB and may not unlock via codes Continue? Yes
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM3 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 38390846
NET lock: 24720926
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.33.2
plase do something or refund my cadit
br,
gsm_uzzal
unlock success but still invalid sim
here is proof
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G935U
Selected port: COM21 Z3X BOX Serial Port
Software version: 33.2
Checking Login and Password... OK
Ballance: 45 crd.
You have 45 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G935U
Android version: 7.0
PDA version: G935UUEU4BQD2
CSC version: G935UOYM4BQD2
Phone version: G935UUEU4BQD2
Product code: SM-G935TZSATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: RF8H21PDEQR
IMEI: 35775107048xxxxx
HW version: REV0.7
RF cal date: 2016.02.22
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2017-04-01
Boot Warranty bit: 0
This phone may be locked to TMB and may not unlock via codes Continue? Yes
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM3 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 38390846
NET lock: 24720926
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.33.2
plase do something or refund my cadit
br,
gsm_uzzal
