hello,
customer said that phone hang on logo wile it was charging,
i tryed with two firmware, one is 4files, with pit and without pit, tryed with conbinasion file, still can't flash, error on param.bin and if i skip param.bin it make error on boot.bin or system.bin.
phone is binary 6.
files that i tryed :
G925FXXU6ERD1_G925FXEO6ERC2
G925FXXU6ERD3_OJT6ERD1 4files
COMBINATION_OXA_FA50_G925FXXU6ARC1
customer said that phone hang on logo wile it was charging,
i tryed with two firmware, one is 4files, with pit and without pit, tryed with conbinasion file, still can't flash, error on param.bin and if i skip param.bin it make error on boot.bin or system.bin.
phone is binary 6.
files that i tryed :
G925FXXU6ERD1_G925FXEO6ERC2
G925FXXU6ERD3_OJT6ERD1 4files
COMBINATION_OXA_FA50_G925FXXU6ARC1
Code:
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-G925F
Software version: 33.5
File analysis... OK
Total file size: 0x36998C34 (873 Mb)
Searching USB Flash interface... COM77 detected
Setup connection... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending param.bin... error timeout
Done with Samsung Tool PRO v.33.5
