hi z3x team,
i process a j250g, but did not get a code, stuck on waiting for server to reply,
but when i try it again my credit was eaten..5 credit left on my account..
so i bought another 50 credit again from my trusted site, and enter new id and password ..
but this time this is what i got, error too..just like my previous post about j250g..
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-J250G
Selected port: COM40 Z3X BOX Serial Port
Software version: 33.8
Checking Login and Password... OK
Ballance: 35 crd.
You have 35 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J250G
Android version: 7.1.1
PDA version: J250GDXU2ARF2
CSC version: J250GVAP2ARG1
Phone version: J250GDXU2ARF2
Product code: SM-J250GZKAVAP
CSC country code: Australia
CSC sales code: VAP
Phone SN: R28K21GH4DE
IMEI: 354062090220213
HW version: MP0.800
RF cal date: 2018.02.12
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2018-06-01
Boot Warranty bit: 0
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM152 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (0)
please update phone firmware
Done with Samsung Tool PRO v.33.8
and this is the phone that im trying to unlock..
i process a j250g, but did not get a code, stuck on waiting for server to reply,
but when i try it again my credit was eaten..5 credit left on my account..
so i bought another 50 credit again from my trusted site, and enter new id and password ..
but this time this is what i got, error too..just like my previous post about j250g..
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-J250G
Selected port: COM40 Z3X BOX Serial Port
Software version: 33.8
Checking Login and Password... OK
Ballance: 35 crd.
You have 35 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J250G
Android version: 7.1.1
PDA version: J250GDXU2ARF2
CSC version: J250GVAP2ARG1
Phone version: J250GDXU2ARF2
Product code: SM-J250GZKAVAP
CSC country code: Australia
CSC sales code: VAP
Phone SN: R28K21GH4DE
IMEI: 354062090220213
HW version: MP0.800
RF cal date: 2018.02.12
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2018-06-01
Boot Warranty bit: 0
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM152 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (0)
please update phone firmware
Done with Samsung Tool PRO v.33.8
and this is the phone that im trying to unlock..
