NEED HELP
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G950W
Selected port: COM22 SAMSUNG Mobile USB Serial Port
Software version: 33.8
Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G950W
Android version: 8.0.0
PDA version: G950WVLU5BRG4
CSC version: G950WOYA5BRG4
Phone version: G950WVLU5BRG4
Product code: SM-G950WZKAGLW
CSC country code: Canada
CSC sales code: GLW
Phone SN: R28J80CL2RX
IMEI: 355757083057329
HW version: REV1.0
RF cal date: 2017.08.04
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-08-01
Boot Warranty bit: 0
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM25 detected
Reading data from phone... OK
Calculating... error (0)
Done with Samsung Tool PRO v.33.8
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G950W
Selected port: COM22 SAMSUNG Mobile USB Serial Port
Software version: 33.8
Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G950W
Android version: 8.0.0
PDA version: G950WVLU5BRG4
CSC version: G950WOYA5BRG4
Phone version: G950WVLU5BRG4
Product code: SM-G950WZKAGLW
CSC country code: Canada
CSC sales code: GLW
Phone SN: R28J80CL2RX
IMEI: 355757083057329
HW version: REV1.0
RF cal date: 2017.08.04
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2018-08-01
Boot Warranty bit: 0
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Searching Ramdump interface... COM25 detected
Reading data from phone... OK
Calculating... error (0)
Done with Samsung Tool PRO v.33.8
