Hello, phone is dead during flashing..
Now detected as Qualcomm device...
I think EMMC is Damage Smart Repair And Factory Repair is Not Working
Here Is Log..
So can this file be written "SEM16G_03_10_2018_17_30_08.bin" on new EMMC..?
If yes kindly tell the process please..
Now detected as Qualcomm device...
I think EMMC is Damage Smart Repair And Factory Repair is Not Working
Here Is Log..
Code:
Model Settings:
Interface : eMMC
Brand : motorola
Model : xt1068 8gb
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/MOTOROLA_XT1068_8GB_(TEST)_THANKS_TO_MR_CBCELULAR.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Sandisk eMMC SEM16G
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 45010053454D313647072586C55A91BD
Manufacturer ID : 0X45
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SEM16G
Product revision : 0.7
Product serial number : (hex) 2586C55A
Manufacturing date : 09/2014
---------------------------------------------------------------
CSD Info
CSD : D00F00320F5903FFFFFFFFFF8A40407F
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 10 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Max enhanced data size: 7684096 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/SEM16G_03_10_2018_17_30_08.bin.
If yes kindly tell the process please..