GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 212992
Number of sectors : 2945024
Device Manufacturer :samsung
Device Platform :mrvl
Build ID :KOT49H
Display Build ID :KOT49H.T210XXBNI1
Release ID :4.4.2
Device Model :SM-T210
Device Name :lt02wifixx
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :lt02wifixx-user 4.4.2 KOT49H T210XXBNI1 release-keys
Backup EXT_CSD saved to file D:/Archivos de programas/GsmServer/Medusa Pro Software/EXT_CSD Backups/M8G1WA_10_10_2018_19_22_03.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.8; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: MRD (00002000, 00000800) 1024 KB
P02: MRD_BK (00002800, 00000800) 1024 KB
P03: BOTA0 (00003000, 00002000) 4 MB
P04: SBL2 (00005000, 00002000) 4 MB
P05: SBL (00007000, 00002000) 4 MB
P06: EFS (00009000, 00006000) 12 MB
P07: PARAM (0000F000, 00004000) 8 MB
P08: MODEM (00013000, 00006000) 12 MB
P09: KERNEL (00019000, 00006000) 12 MB
P10: RECOVERY (0001F000, 00006000) 12 MB
P11: MISC (00025000, 00005000) 10 MB
P12: NVM (0002A000, 00008000) 16 MB
P13: MEP (00032000, 00002000) 4 MB
P14: SYSTEM (00034000, 002CF000) 1438 MB
P15: CACHE (00303000, 00064000) 200 MB
P16: HIDDEN (00367000, 00064000) 200 MB
P17: USER (003CB000, 00AC2000) 5.379 GB
Selected pit file: D:/SOFTWARE CELL/Samsung/Firmware/NsPRO/T210/T210XXBNH4_OLBBNH1_v4.4.2_Repair_Firmware/LT02.pit
Open file "D:/SOFTWARE CELL/Samsung/Firmware/NsPRO/T210/T210XXBNH4_OLBBNH1_v4.4.2_Repair_Firmware/BL_T210XXBNH4_2432755_REV00_user_low_ship.tar.md5" .
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition PBL... Done.
Switched to user area.
Writing partition SBL2... Done.
Writing partition SBL... Done.
Writing partition PARAM... Done.
Writing is finished.
SW: 1.6.8; FW: 1.24.
Disconnected.
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 212992
Number of sectors : 2945024
Device Manufacturer :samsung
Device Platform :mrvl
Build ID :KOT49H
Display Build ID :KOT49H.T210XXBNI1
Release ID :4.4.2
Device Model :SM-T210
Device Name :lt02wifixx
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :lt02wifixx-user 4.4.2 KOT49H T210XXBNI1 release-keys
Backup EXT_CSD saved to file D:/Archivos de programas/GsmServer/Medusa Pro Software/EXT_CSD Backups/M8G1WA_10_10_2018_19_22_03.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.8; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: MRD (00002000, 00000800) 1024 KB
P02: MRD_BK (00002800, 00000800) 1024 KB
P03: BOTA0 (00003000, 00002000) 4 MB
P04: SBL2 (00005000, 00002000) 4 MB
P05: SBL (00007000, 00002000) 4 MB
P06: EFS (00009000, 00006000) 12 MB
P07: PARAM (0000F000, 00004000) 8 MB
P08: MODEM (00013000, 00006000) 12 MB
P09: KERNEL (00019000, 00006000) 12 MB
P10: RECOVERY (0001F000, 00006000) 12 MB
P11: MISC (00025000, 00005000) 10 MB
P12: NVM (0002A000, 00008000) 16 MB
P13: MEP (00032000, 00002000) 4 MB
P14: SYSTEM (00034000, 002CF000) 1438 MB
P15: CACHE (00303000, 00064000) 200 MB
P16: HIDDEN (00367000, 00064000) 200 MB
P17: USER (003CB000, 00AC2000) 5.379 GB
Selected pit file: D:/SOFTWARE CELL/Samsung/Firmware/NsPRO/T210/T210XXBNH4_OLBBNH1_v4.4.2_Repair_Firmware/LT02.pit
Open file "D:/SOFTWARE CELL/Samsung/Firmware/NsPRO/T210/T210XXBNH4_OLBBNH1_v4.4.2_Repair_Firmware/BL_T210XXBNH4_2432755_REV00_user_low_ship.tar.md5" .
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition PBL... Done.
Switched to user area.
Writing partition SBL2... Done.
Writing partition SBL... Done.
Writing partition PARAM... Done.
Writing is finished.
SW: 1.6.8; FW: 1.24.
Disconnected.