BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or
press 'Write CERT' to restore certificates.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
Or use 'Activate Diag' function from 'Repair' tab.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Write CERT
Selected model: SM-G925V
Software version: 34.3
Checking CERT file... OK
KEY ID: 0449
Waiting ADB device... OK
Reading phone info...
Model: SM-G925V
Android version: 5.1.1
PDA version: G925VVRU4BOG9
CSC version: G925VVZW4BOG9
Phone version: G925VVRU4BOG9
Product code: Not Active
CSC country code: USA
CSC sales code: VZW
Phone SN: R28G33X8PZX
IMEI: 990004854093303
HW version: G925V.04
RF cal date: 2015.03.29
Chip name: EXYNOS7420
Modem board: MDM9635M
Boot Warranty bit: 0
Writing AT RIL... OK
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0449
Writing CERT... OK
Checking CERT status... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.34.3
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or
press 'Write CERT' to restore certificates.
To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and select 'DM/DUN over HSIC'.
Or use 'Activate Diag' function from 'Repair' tab.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select diagnostic port in port settings.
6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.
Operation: Write CERT
Selected model: SM-G925V
Software version: 34.3
Checking CERT file... OK
KEY ID: 0449
Waiting ADB device... OK
Reading phone info...
Model: SM-G925V
Android version: 5.1.1
PDA version: G925VVRU4BOG9
CSC version: G925VVZW4BOG9
Phone version: G925VVRU4BOG9
Product code: Not Active
CSC country code: USA
CSC sales code: VZW
Phone SN: R28G33X8PZX
IMEI: 990004854093303
HW version: G925V.04
RF cal date: 2015.03.29
Chip name: EXYNOS7420
Modem board: MDM9635M
Boot Warranty bit: 0
Writing AT RIL... OK
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0449
Writing CERT... OK
Checking CERT status... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.34.3
