-->

Wednesday, November 14, 2018

g950w flashing error

  Unlock4samsung       Wednesday, November 14, 2018
help me g950w always flashing error try with latest firmware and combination file but error in system img time out
try with many file but same problem help me
Quote:

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-G950W
Software version: 34.3

File analysis... OK
Total file size: 0x1D5AD7E66 (7514 Mb)
Searching USB Flash interface... COM40 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending abl.elf.lz4... OK
Sending bksecapp.mbn.lz4... OK
Sending xbl.elf.lz4... OK
Sending tz.mbn.lz4... OK
Sending hyp.mbn.lz4... OK
Sending devcfg.mbn.lz4... OK
Sending pmic.elf.lz4... OK
Sending rpm.mbn.lz4... OK
Sending cmnlib.mbn.lz4... OK
Sending cmnlib64.mbn.lz4... OK
Sending keymaster.mbn.lz4... OK
Sending apdp.mbn.lz4... OK
Sending msadp.mbn.lz4... OK
Sending sec.dat.lz4... OK
Sending NON-HLOS.bin.lz4... OK
Sending storsec.mbn.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.ext4.lz4... error timeout

Done with Samsung Tool PRO v.34.3
this error after 100% system img write
logoblog

Previous
« Prev Post