Welcome to Medusa Pro Software version 1.7.0.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present
is it nessesary to put exact value of 150 ohms resistor to be able to connect it? I tried to put a 100ohms and a 200 ohms resistor as pull ups but still not connected..
the phone is alive I only want it to unlock
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : LS777
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_LS777_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present
is it nessesary to put exact value of 150 ohms resistor to be able to connect it? I tried to put a 100ohms and a 200 ohms resistor as pull ups but still not connected..
the phone is alive I only want it to unlock
