samsung s8 g950u flash done
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-G950U
Software version: 31.3
File analysis... OK
Total file size: 0x18705A824 (6256 Mb)
Searching USB Flash interface... COM52 detected
Setup connection... OK
Getting device info... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending abl.elf... OK
Sending bksecapp.mbn... OK
Sending xbl.elf... OK
Sending tz.mbn... OK
Sending hyp.mbn... OK
Sending devcfg.mbn... OK
Sending pmic.elf... OK
Sending rpm.mbn... OK
Sending cmnlib.mbn... OK
Sending cmnlib64.mbn... OK
Sending keymaster.mbn... OK
Sending apdp.mbn... OK
Sending msadp.mbn... OK
Sending sec.dat... OK
Sending NON-HLOS.bin... OK
Sending storsec.mbn... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending persist.img.ext4... OK
Sending modem.bin... OK
Sending adspso.bin... OK
Sending cache.img.ext4... OK
Sending omr.img.ext4... OK
Sending userdata.img.ext4... OK
Sending cache.img.ext4... OK
Flashing done (time - 00:06:31)
Done with Samsung Tool PRO v.31.3
