REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Operation: Repair DRK
Selected model: SM-G925T
Software version: 34.8
Checking local file... OK
Searching server... OK
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM7 detected
Setup connection... OK
Reading data from phone... OK
Sending data to phone... OK
Sending data to phone... OK
Waiting ADB device... OK
Reading phone info...
Recovery build version: 6.0.1
Boot version: G925TUVS6FRC1
Platform: exynos7420
Boot serial: 04157df471da3d24
Product board: zerolte
Initialization zTool... OK
Running zTool, please wait... OK
Checking DRK status... NG!
Writing DRK... error ()
Done with Samsung Tool PRO v.34.8
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Operation: Repair DRK
Selected model: SM-G925T
Software version: 34.8
Checking local file... OK
Searching server... OK
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM7 detected
Setup connection... OK
Reading data from phone... OK
Sending data to phone... OK
Sending data to phone... OK
Waiting ADB device... OK
Reading phone info...
Recovery build version: 6.0.1
Boot version: G925TUVS6FRC1
Platform: exynos7420
Boot serial: 04157df471da3d24
Product board: zerolte
Initialization zTool... OK
Running zTool, please wait... OK
Checking DRK status... NG!
Writing DRK... error ()
Done with Samsung Tool PRO v.34.8
