Hi
is possible repair this phone D325F8 i already tried repair usb mode . but phone is deteted as QDLoader 9008
EMMC Jtag mode:
is possible repair this phone D325F8 i already tried repair usb mode . but phone is deteted as QDLoader 9008
Code:
CPU : Qualcomm MSM8610
Storage Device: Hynix eMMC H4G1d
Device ID : 00900001
Block size : 512 bytes
Blocks : 7634944
Storage size : 3728 Mb
Connect successful.
Disconnected
Selected device model: LG D325F8 (MSM8610) USB
Connecting. Please wait...
Interface : USB
CPU : Qualcomm MSM8610
Storage Device: Hynix eMMC H4G1d
Device ID : 00909201
Block size : 512 bytes
Blocks : 7634944
Storage size : 3728 Mb
Opening "C:\Program Files\GsmServer\Medusa_old\Firmware\LG_D325F8_Repair.mf" file...
Writing ABOOT section. Please wait... Done
Writing BOOT section. Please wait... Done
Disconnected
Repair done.
Code:
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D325
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_D325_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473164040509A2973B12D9
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex) 9A2973B
Manufacturing date : 01/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H4G1d_10_01_2019_16_03_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.2; FW: 1.24.
