c7000 boot into recovery after flash

please help i have sm-c7000 it hang on logo but after i flash this phone with firmware i downloaded from z3x phone only boot into recovery mode i wipe data factory reset and cache still same i download anothwer fw from smamobile still the same thing. logs below i need any solution that can make me use this phone.

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-C7000
Software version: 34.8

File analysis... OK
Total file size: 0x13011C743 (4865 Mb)
Searching USB Flash interface... COM15 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending aboot.mbn.lz4... OK
Sending sbl1.mbn.lz4... OK
Sending rpm.mbn.lz4... OK
Sending tz.mbn.lz4... OK
Sending devcfg.mbn.lz4... OK
Sending cmnlib.mbn.lz4... OK
Sending keymaster.mbn.lz4... OK
Sending apdp.mbn.lz4... OK
Sending msadp.mbn.lz4... OK
Sending NON-HLOS.bin.lz4... OK
Sending lksecapp.mbn.lz4... OK
Sending sec.dat.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.ext4.lz4... OK
Sending persist.img.ext4.lz4... OK
Sending userdata.img.ext4.lz4... OK
Sending modem.bin... OK
Sending adspso.bin... OK
Sending cache.img.ext4.lz4... OK
Flashing done (time - 00:06:04)

Done with Samsung Tool PRO v.34.8