Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-I9300I
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9300I_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016GE2
Page size : 512 B
Block size : 512 B
Block count : 1426265150
Size : 680.10 GB (696418.53 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136474532049A4D05F18107
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016GE2
Product revision : 0.4
Product serial number : (hex) 9A4D05F1
Manufacturing date : 08/1998
---------------------------------------------------------------
CSD Info
CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 102400 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/016GE2_21_02_2019_04_32_02.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.2; FW: 1.24.
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9300I_EMMC.srf".
Write data verification is enabled.
Writing GPT partition...
Write verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : GT-I9300I
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9300I_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016GE2
Page size : 512 B
Block size : 512 B
Block count : 1426265150
Size : 680.10 GB (696418.53 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136474532049A4D05F18107
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016GE2
Product revision : 0.4
Product serial number : (hex) 9A4D05F1
Manufacturing date : 08/1998
---------------------------------------------------------------
CSD Info
CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.0
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 102400 Kbytes
Boot1 size : 0 Kbytes
Boot2 size : 0 Kbytes
RPMB size : 0 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/016GE2_21_02_2019_04_32_02.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.2; FW: 1.24.
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_GT-I9300I_EMMC.srf".
Write data verification is enabled.
Writing GPT partition...
Write verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
