J327p boost only qualcomm mode

Phone was working and went dead after partial combination file, what i have done is:

1)correct boot:
artition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

2)flash with srf from support and reconect and factory repair with pit and flash with newest 4 file firmware, i attach log, phone is detected as qualcomm hs-usb QdLoader, but doesnt do anything more..

What i am missing??? Thanks in advance...

Quote:

Welcome to Medusa Pro Software version 1.7.4. Started. Reader #0: Gemalto e-gate Smart Card 0 Reader #1: Generic EMV Smartcard Reader 0 Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : SM-J327P SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J327P_EMMC.srf Voltage : 2.4V Bus Mode : 1 bit Bus speed : Auto Connecting... ERROR[001]: Can not connect. No target device present. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : SM-J327P SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J327P_EMMC.srf Voltage : 2.4V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Samsung eMMC Q316BB Page size : 512 B Block size : 512 B Block count : 30777344 Size : 14.68 GB (15028.00 MB) --------------------------------------------------------------- CID Info CID : 150100513331364242001FD5CE752525 Manufacturer ID : 0X15 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : Q316BB Product revision : 0.0 Product serial number : (hex) 1FD5CE75 Manufacturing date : 02/2018 --------------------------------------------------------------- CSD Info CSD : D02701320F5903FFF6DBFFEF8E40400D CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.7 (for MMC v5.0, v5.01) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 4096 Kbytes Partition config : (0x08) 00001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x01) RST_n signal is permanently enabled Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 7692288 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Ok Disk/Image size : ab400000 bytes Device sector size : 512 bytes Partition offset : 622592 Number of sectors : 7176192 Device Manufacturer :samsung Device Platform :msm8937 Build ID :MMB29M Display Build ID :MMB29M.J327PVPU4ARJ2 Release ID :6.0.1 Device Model :SM-J327P Device Name :j3popltespr Architecture ABI :armeabi-v7a Architecture ABI2 :armeabi Architecture ABI List :armeabi-v7a,armeabi Build Description :j3popltespr-user 6.0.1 MMB29M J327PVPU4ARJ2 release-keys Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/Q316BB_01_02_2019_17_08_44.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.4; FW: 1.24. P00: GPT (00000000, 00002000) 4 MB P01: sbl1 (00002000, 00000400) 512 KB P02: sbl1bak (00002400, 00000400) 512 KB P03: ddr (00002800, 00000040) 32 KB P04: limits (00002840, 00000040) 32 KB P05: aboot (00002880, 00001000) 2048 KB P06: rpm (00003880, 00000400) 512 KB P07: tz (00003C80, 00001000) 2048 KB P08: hyp (00004C80, 00000400) 512 KB P09: devcfg (00005080, 00000200) 256 KB P10: fsg (00005280, 00001800) 3072 KB P11: sec (00006A80, 00000020) 16 KB P12: keymaster (00006AA0, 00000200) 256 KB P13: cmnlib (00006CA0, 00000200) 256 KB P14: cmnlib64 (00006EA0, 00000200) 256 KB P15: lksecapp (000070A0, 00000400) 512 KB P16: apdp (000074A0, 00000200) 256 KB P17: mdsap (000076A0, 00000200) 256 KB P18: pad (000078A0, 00000760) 944 KB P19: modemst1 (00008000, 00001800) 3072 KB P20: modemst2 (00009800, 00001800) 3072 KB P21: param (0000B000, 00005000) 10 MB P22: efs (00010000, 00007000) 14 MB P23: boot (00017000, 00010000) 32 MB P24: recovery (00027000, 00010000) 32 MB P25: bota (00037000, 00003800) 7 MB P26: fota (0003A800, 00002802) 5.001 MB P27: backup (0003D002, 00002FF6) 5.995 MB P28: fsc (0003FFF8, 00001800) 3072 KB P29: ssd (000417F8, 00000010) 8 KB P30: persist (00041808, 00010000) 32 MB P31: persistent (00051808, 00000800) 1024 KB P32: steady (00052008, 00000800) 1024 KB P33: keystore (00052808, 00000400) 512 KB P34: config (00052C08, 00000040) 32 KB P35: mota (00052C48, 00000400) 512 KB P36: dpo (00053048, 00000200) 256 KB P37: mdtp (00053248, 00000080) 64 KB P38: dip (000532C8, 00000800) 1024 KB P39: oem (00053AC8, 00000080) 64 KB P40: mcfg (00053B48, 00002000) 4 MB P41: dsp (00055B48, 00008000) 16 MB P42: modem (0005DB48, 0002DCB8) 91.59 MB P43: apnhlos (0008B800, 0000C000) 24 MB P44: reserved2 (00097800, 00000800) 1024 KB P45: system (00098000, 006D8000) 3504 MB P46: cache (00770000, 00096000) 300 MB P47: carrier (00806000, 00016800) 45 MB P48: userdata (0081C800, 0153B800) 10.62 GB Boot config succesfully changed! Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : SM-J327P SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J327P_EMMC.srf Voltage : 2.4V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Samsung eMMC Q316BB Page size : 512 B Block size : 512 B Block count : 30777344 Size : 14.68 GB (15028.00 MB) --------------------------------------------------------------- CID Info CID : 150100513331364242001FD5CE752525 Manufacturer ID : 0X15 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : Q316BB Product revision : 0.0 Product serial number : (hex) 1FD5CE75 Manufacturing date : 02/2018 --------------------------------------------------------------- CSD Info CSD : D02701320F5903FFF6DBFFEF8E40400D CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.7 (for MMC v5.0, v5.01) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 4096 Kbytes Partition config : (0x08) 00001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x01) RST_n signal is permanently enabled Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 7692288 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Ok Disk/Image size : ab400000 bytes Device sector size : 512 bytes Partition offset : 622592 Number of sectors : 7176192 Device Manufacturer :samsung Device Platform :msm8937 Build ID :MMB29M Display Build ID :MMB29M.J327PVPU4ARJ2 Release ID :6.0.1 Device Model :SM-J327P Device Name :j3popltespr Architecture ABI :armeabi-v7a Architecture ABI2 :armeabi Architecture ABI List :armeabi-v7a,armeabi Build Description :j3popltespr-user 6.0.1 MMB29M J327PVPU4ARJ2 release-keys Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/Q316BB_01_02_2019_17_10_17.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.4; FW: 1.24. P00: GPT (00000000, 00002000) 4 MB P01: sbl1 (00002000, 00000400) 512 KB P02: sbl1bak (00002400, 00000400) 512 KB P03: ddr (00002800, 00000040) 32 KB P04: limits (00002840, 00000040) 32 KB P05: aboot (00002880, 00001000) 2048 KB P06: rpm (00003880, 00000400) 512 KB P07: tz (00003C80, 00001000) 2048 KB P08: hyp (00004C80, 00000400) 512 KB P09: devcfg (00005080, 00000200) 256 KB P10: fsg (00005280, 00001800) 3072 KB P11: sec (00006A80, 00000020) 16 KB P12: keymaster (00006AA0, 00000200) 256 KB P13: cmnlib (00006CA0, 00000200) 256 KB P14: cmnlib64 (00006EA0, 00000200) 256 KB P15: lksecapp (000070A0, 00000400) 512 KB P16: apdp (000074A0, 00000200) 256 KB P17: mdsap (000076A0, 00000200) 256 KB P18: pad (000078A0, 00000760) 944 KB P19: modemst1 (00008000, 00001800) 3072 KB P20: modemst2 (00009800, 00001800) 3072 KB P21: param (0000B000, 00005000) 10 MB P22: efs (00010000, 00007000) 14 MB P23: boot (00017000, 00010000) 32 MB P24: recovery (00027000, 00010000) 32 MB P25: bota (00037000, 00003800) 7 MB P26: fota (0003A800, 00002802) 5.001 MB P27: backup (0003D002, 00002FF6) 5.995 MB P28: fsc (0003FFF8, 00001800) 3072 KB P29: ssd (000417F8, 00000010) 8 KB P30: persist (00041808, 00010000) 32 MB P31: persistent (00051808, 00000800) 1024 KB P32: steady (00052008, 00000800) 1024 KB P33: keystore (00052808, 00000400) 512 KB P34: config (00052C08, 00000040) 32 KB P35: mota (00052C48, 00000400) 512 KB P36: dpo (00053048, 00000200) 256 KB P37: mdtp (00053248, 00000080) 64 KB P38: dip (000532C8, 00000800) 1024 KB P39: oem (00053AC8, 00000080) 64 KB P40: mcfg (00053B48, 00002000) 4 MB P41: dsp (00055B48, 00008000) 16 MB P42: modem (0005DB48, 0002DCB8) 91.59 MB P43: apnhlos (0008B800, 0000C000) 24 MB P44: reserved2 (00097800, 00000800) 1024 KB P45: system (00098000, 006D8000) 3504 MB P46: cache (00770000, 00096000) 300 MB P47: carrier (00806000, 00016800) 45 MB P48: userdata (0081C800, 0153B800) 10.62 GB Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J327P_EMMC.srf". Write data verification is enabled. Writing GPT partition... Done. Writing sbl1 partition... Done. Writing sbl1bak partition... Done. Writing ddr partition... Done. Writing limits partition... Done. Writing aboot partition... Done. Writing rpm partition... Done. Writing tz partition... Done. Writing hyp partition... Done. Writing devcfg partition... Done. Writing sec partition... Done. Writing keymaster partition... Done. Writing cmnlib partition... Done. Writing cmnlib64 partition... Done. Writing lksecapp partition... Done. Writing apdp partition... Done. Writing mdsap partition... Done. Writing pad partition... Done. Writing param partition... Done. Writing boot partition... Done. Writing recovery partition... Done. Writing bota partition... Done. Writing fota partition... Done. Writing backup partition... Done. Writing fsc partition... Done. Writing ssd partition... Done. Writing persist partition... Done. Writing persistent partition... Done. Writing steady partition... Done. Writing keystore partition... Done. Writing config partition... Done. Writing mota partition... Done. Writing dpo partition... Done. Writing mdtp partition... Done. Writing dip partition... Done. Writing oem partition... Done. Writing mcfg partition... Done. Writing dsp partition... Done. Writing modem partition... Done. Writing apnhlos partition... Done. Writing reserved2 partition... Done. Writing carrier partition... Done. Smart Repair is successfully complete. SW: 1.7.4; FW: 1.24. Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Brand : Samsung Model : SM-J327P SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J327P_EMMC.srf Voltage : 2.4V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Samsung eMMC Q316BB Page size : 512 B Block size : 512 B Block count : 30777344 Size : 14.68 GB (15028.00 MB) --------------------------------------------------------------- CID Info CID : 150100513331364242001FD5CE752525 Manufacturer ID : 0X15 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : Q316BB Product revision : 0.0 Product serial number : (hex) 1FD5CE75 Manufacturing date : 02/2018 --------------------------------------------------------------- CSD Info CSD : D02701320F5903FFF6DBFFEF8E40400D CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.7 (for MMC v5.0, v5.01) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 4096 Kbytes Partition config : (0x08) 00001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x01) RST_n signal is permanently enabled Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 7692288 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Ok Disk/Image size : ab400000 bytes Device sector size : 512 bytes Partition offset : 622592 Number of sectors : 7176192 Device Manufacturer :samsung Device Platform :msm8937 Build ID :MMB29M Display Build ID :MMB29M.J327PVPU4ARJ2 Release ID :6.0.1 Device Model :SM-J327P Device Name :j3popltespr Architecture ABI :armeabi-v7a Architecture ABI2 :armeabi Architecture ABI List :armeabi-v7a,armeabi Build Description :j3popltespr-user 6.0.1 MMB29M J327PVPU4ARJ2 release-keys Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/Q316BB_01_02_2019_17_16_37.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.4; FW: 1.24. P00: GPT (00000000, 00002000) 4 MB P01: sbl1 (00002000, 00000400) 512 KB P02: sbl1bak (00002400, 00000400) 512 KB P03: ddr (00002800, 00000040) 32 KB P04: limits (00002840, 00000040) 32 KB P05: aboot (00002880, 00001000) 2048 KB P06: rpm (00003880, 00000400) 512 KB P07: tz (00003C80, 00001000) 2048 KB P08: hyp (00004C80, 00000400) 512 KB P09: devcfg (00005080, 00000200) 256 KB P10: fsg (00005280, 00001800) 3072 KB P11: sec (00006A80, 00000020) 16 KB P12: keymaster (00006AA0, 00000200) 256 KB P13: cmnlib (00006CA0, 00000200) 256 KB P14: cmnlib64 (00006EA0, 00000200) 256 KB P15: lksecapp (000070A0, 00000400) 512 KB P16: apdp (000074A0, 00000200) 256 KB P17: mdsap (000076A0, 00000200) 256 KB P18: pad (000078A0, 00000760) 944 KB P19: modemst1 (00008000, 00001800) 3072 KB P20: modemst2 (00009800, 00001800) 3072 KB P21: param (0000B000, 00005000) 10 MB P22: efs (00010000, 00007000) 14 MB P23: boot (00017000, 00010000) 32 MB P24: recovery (00027000, 00010000) 32 MB P25: bota (00037000, 00003800) 7 MB P26: fota (0003A800, 00002802) 5.001 MB P27: backup (0003D002, 00002FF6) 5.995 MB P28: fsc (0003FFF8, 00001800) 3072 KB P29: ssd (000417F8, 00000010) 8 KB P30: persist (00041808, 00010000) 32 MB P31: persistent (00051808, 00000800) 1024 KB P32: steady (00052008, 00000800) 1024 KB P33: keystore (00052808, 00000400) 512 KB P34: config (00052C08, 00000040) 32 KB P35: mota (00052C48, 00000400) 512 KB P36: dpo (00053048, 00000200) 256 KB P37: mdtp (00053248, 00000080) 64 KB P38: dip (000532C8, 00000800) 1024 KB P39: oem (00053AC8, 00000080) 64 KB P40: mcfg (00053B48, 00002000) 4 MB P41: dsp (00055B48, 00008000) 16 MB P42: modem (0005DB48, 0002DCB8) 91.59 MB P43: apnhlos (0008B800, 0000C000) 24 MB P44: reserved2 (00097800, 00000800) 1024 KB P45: system (00098000, 006D8000) 3504 MB P46: cache (00770000, 00096000) 300 MB P47: carrier (00806000, 00016800) 45 MB P48: userdata (0081C800, 0153D7D8) 10.62 GB Selected pit file: D:/2013/0 Samsung/3 Originales/j327p/arj2/J3POPLTE_USA_SPR.pit Open file "D:/2013/0 Samsung/3 Originales/j327p/arj2/AP_J327PVPU4ARJ2_CL14531760_QB20112732_REV00_user_ low_ship_MULTI_CERT.tar.md5". Open file "D:/2013/0 Samsung/3 Originales/j327p/arj2/BL_J327PVPU4ARJ2_CL14531760_QB20112732_REV00_user_ low_ship_MULTI_CERT.tar.md5". Open file "D:/2013/0 Samsung/3 Originales/j327p/arj2/CP_J327PVPU4ARJ2_CL14531760_QB20112732_REV00_user_ low_ship_MULTI_CERT.tar.md5". Open file "D:/2013/0 Samsung/3 Originales/j327p/arj2/CSC_SPT_J327PSPT4ARJ2_CL14531760_QB20112732_REV00_ user_low_ship_MULTI_CERT.tar.md5". Writing MBR...Done. Writing primary GPT...Done. Writing secondary GPT...Done. Writing PIT Write data verification is enabled. Writing. Please wait... Writing partition SBL1... Done. Writing partition ABOOT... Done. Writing partition RPM... Done. Writing partition TZ... Done. Writing partition DEVCFG... Done. Writing partition SEC... Done. Writing partition KEYMASTER... Done. Writing partition CMNLIB... Done. Writing partition LKSECAPP... Done. Writing partition APDP... Done. Writing partition MDSAP... Done. Writing partition BOOT... Done. Writing partition RECOVERY... Done. Writing partition PERSIST... Done. Writing partition DSP... Done. Writing partition MODEM... Done. Writing partition APNHLOS... Done. Writing partition SYSTEM... Done. Writing partition CACHE... Done. Writing is finished. SW: 1.7.4; FW: 1.24. Disconnected.