Hello. i repaired a T377P with jatg by emmc, but when it finished only boot on Qualcomm mode.
i wat to bloot on Downlad mode to flash it to Stock Firmware.
Welcome to Octoplus Pro JTAG Software version 1.7.2.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-T377P
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-T377P_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 400073
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 11010034303030373300EEAA33157245
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 400073
Product revision : 0.0
Product serial number : (hex) EEAA3315
Manufacturing date : 07/2015
---------------------------------------------------------------
CSD Info
CSD : D07E00320F5903FFFFFFFFE78A4000D1
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 8 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7696384 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 376832
Number of sectors : 4915200
Device Manufacturer :samsung
Device Platform :msm8916
Build ID :NMF26X
Display Build ID :NMF26X.T377PVPU3CQI4
Release ID :7.1.1
Device Model :SM-T377P
Device Name :gtesqltespr
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :gtesqltespr-user 7.1.1 NMF26X T377PVPU3CQI4 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/400073_05_02_2019_16_46_18.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: apnhlos (00002000, 00007800) 15 MB
P02: modem (00009800, 0001CB80) 57.44 MB
P03: sbl1 (00026380, 00000400) 512 KB
P04: ddr (00026780, 00000040) 32 KB
P05: aboot (000267C0, 00001000) 2048 KB
P06: rpm (000277C0, 00000400) 512 KB
P07: qsee (00027BC0, 00000600) 768 KB
P08: qhee (000281C0, 00000400) 512 KB
P09: fsg (000285C0, 00001800) 3072 KB
P10: sec (00029DC0, 00000020) 16 KB
P11: pad (00029DE0, 00005220) 10.27 MB
P12: param (0002F000, 00005000) 10 MB
P13: efs (00034000, 00007000) 14 MB
P14: modemst1 (0003B000, 00001800) 3072 KB
P15: modemst2 (0003C800, 00001800) 3072 KB
P16: boot (0003E000, 00006800) 13 MB
P17: recovery (00044800, 00007800) 15 MB
P18: fota (0004C000, 00002002) 4.001 MB
P19: backup (0004E002, 000037EE) 6.991 MB
P20: fsc (000517F0, 00001800) 3072 KB
P21: ssd (00052FF0, 00000010) 8 KB
P22: persist (00053000, 00004000) 8 MB
P23: persistent (00057000, 00000800) 1024 KB
P24: persdata (00057800, 00004800) 9 MB
P25: system (0005C000, 004B0000) 2400 MB
P26: cache (0050C000, 00064000) 200 MB
P27: carrier (00570000, 00016800) 45 MB
P28: userdata (00586800, 017D37D8) 11.91 GB
Repairing from file "C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-T377P_EMMC.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing apnhlos partition... Done.
Writing modem partition... Done.
Writing sbl1 partition... Done.
Writing ddr partition... Done.
Writing aboot partition... Done.
Writing rpm partition... Done.
Writing qsee partition... Done.
Writing qhee partition... Done.
Writing fsg partition... Done.
Writing sec partition... Done.
Writing pad partition... Done.
Writing param partition... Done.
Writing efs partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing fota partition... Done.
Writing backup partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing persist partition... Done.
Writing persistent partition... Done.
Writing persdata partition... Done.
Smart Repair is successfully complete.
SW: 1.7.2; FW: 1.24.
Disconnected.
i wat to bloot on Downlad mode to flash it to Stock Firmware.
Welcome to Octoplus Pro JTAG Software version 1.7.2.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-T377P
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-T377P_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 400073
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 11010034303030373300EEAA33157245
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 400073
Product revision : 0.0
Product serial number : (hex) EEAA3315
Manufacturing date : 07/2015
---------------------------------------------------------------
CSD Info
CSD : D07E00320F5903FFFFFFFFE78A4000D1
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 8 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7696384 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 376832
Number of sectors : 4915200
Device Manufacturer :samsung
Device Platform :msm8916
Build ID :NMF26X
Display Build ID :NMF26X.T377PVPU3CQI4
Release ID :7.1.1
Device Model :SM-T377P
Device Name :gtesqltespr
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :gtesqltespr-user 7.1.1 NMF26X T377PVPU3CQI4 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/400073_05_02_2019_16_46_18.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: apnhlos (00002000, 00007800) 15 MB
P02: modem (00009800, 0001CB80) 57.44 MB
P03: sbl1 (00026380, 00000400) 512 KB
P04: ddr (00026780, 00000040) 32 KB
P05: aboot (000267C0, 00001000) 2048 KB
P06: rpm (000277C0, 00000400) 512 KB
P07: qsee (00027BC0, 00000600) 768 KB
P08: qhee (000281C0, 00000400) 512 KB
P09: fsg (000285C0, 00001800) 3072 KB
P10: sec (00029DC0, 00000020) 16 KB
P11: pad (00029DE0, 00005220) 10.27 MB
P12: param (0002F000, 00005000) 10 MB
P13: efs (00034000, 00007000) 14 MB
P14: modemst1 (0003B000, 00001800) 3072 KB
P15: modemst2 (0003C800, 00001800) 3072 KB
P16: boot (0003E000, 00006800) 13 MB
P17: recovery (00044800, 00007800) 15 MB
P18: fota (0004C000, 00002002) 4.001 MB
P19: backup (0004E002, 000037EE) 6.991 MB
P20: fsc (000517F0, 00001800) 3072 KB
P21: ssd (00052FF0, 00000010) 8 KB
P22: persist (00053000, 00004000) 8 MB
P23: persistent (00057000, 00000800) 1024 KB
P24: persdata (00057800, 00004800) 9 MB
P25: system (0005C000, 004B0000) 2400 MB
P26: cache (0050C000, 00064000) 200 MB
P27: carrier (00570000, 00016800) 45 MB
P28: userdata (00586800, 017D37D8) 11.91 GB
Repairing from file "C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-T377P_EMMC.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing apnhlos partition... Done.
Writing modem partition... Done.
Writing sbl1 partition... Done.
Writing ddr partition... Done.
Writing aboot partition... Done.
Writing rpm partition... Done.
Writing qsee partition... Done.
Writing qhee partition... Done.
Writing fsg partition... Done.
Writing sec partition... Done.
Writing pad partition... Done.
Writing param partition... Done.
Writing efs partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing fota partition... Done.
Writing backup partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing persist partition... Done.
Writing persistent partition... Done.
Writing persdata partition... Done.
Smart Repair is successfully complete.
SW: 1.7.2; FW: 1.24.
Disconnected.
