Unlock done!!!!! Galaxy S7 SM-G930P bit 8 with z3x

This is how to Unlock Samsung S7 SM-G930P with firmware G930PVPS8CSA1
1. Download Combination File here: https://www.mediafire.com/file/rpkxv...8ARJ2.zip/file
2. Open Z3X, select the model and press Unlock. If its ask that is an incorrect model press continue, it's no problem.
3. Download the stock Firmware Here: https://samdb.org/es/download/firmwa...G930PSPT8CSA1/
4. Read pit file with Z3X.
5. Flash the stock firmware and pit file with Z3X, not with Odin.

and done...

This is my log file

Waiting ADB device... OK
Reading phone info...
Model: SM-G930V
Android version: 6.0.1
PDA version: FA60_G930AUCU8ARJ2
CSC version:
Phone version: G930AUCU8ARJ1
Product code: Not Active
CSC country code:
CSC sales code:
Phone SN: 00000000000
IMEI:
HW version: REV0.6
RF cal date: 2016.04.23
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2016-01-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done


Operation: Flash
Selected model: SM-G930P
Software version: 34.3

File analysis... OK
Total file size: 0x16D6C4FCB (5846 Mb)
Searching USB Flash interface... COM4 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending emmc_appsboot.mbn.lz4... OK
Sending lksecapp.mbn.lz4... OK
Sending xbl.elf.lz4... OK
Sending tz.mbn.lz4... OK
Sending hyp.mbn.lz4... OK
Sending devcfg.mbn.lz4... OK
Sending pmic.elf.lz4... OK
Sending rpm.mbn.lz4... OK
Sending cmnlib.mbn.lz4... OK
Sending keymaster.mbn.lz4... OK
Sending apdp.mbn.lz4... OK
Sending msadp.mbn.lz4... OK
Sending cmnlib64.mbn.lz4... OK
Sending sec.dat.lz4... OK
Sending NON-HLOS.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.ext4.lz4... OK
Sending userdata.img.ext4.lz4... OK
Sending modem.bin.lz4... OK
Sending adspso.bin.lz4... OK
Sending cache.img.ext4.lz4... OK
Flashing done (time - 00:06:39)