Welcome to Octoplus Pro JTAG Software version 1.7.5.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MP260
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_MP260_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100515831334D42076AF4DA0864E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) 6AF4DA08
Manufacturing date : 06/2001
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 98304 Kbytes
Boot1 size : 25088 Kbytes
Boot2 size : 25088 Kbytes
RPMB size : 24576 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0xC8) 11001000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + High Speed timings in boot operation
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_04_03_2019_14_32_16.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
Switch error!!!
Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/(BOOT1 LG MP260) SAMSUNG EMMC QX13MB.BIN file...
Write data verification is enabled.
Writing. Please wait...
Write verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MP260
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_MP260_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100515831334D42076AF4DA0864E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) 6AF4DA08
Manufacturing date : 06/2001
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 98304 Kbytes
Boot1 size : 25088 Kbytes
Boot2 size : 25088 Kbytes
RPMB size : 24576 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0xC8) 11001000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + High Speed timings in boot operation
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_04_03_2019_14_33_45.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
The same area.
Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/(BOOT1 LG MP260) SAMSUNG EMMC QX13MB.BIN file...
Write data verification is disabled.
Writing. Please wait...
ERROR[012]: Write error.
At sector 0.
Attempting to write...
Done.
SW: 1.7.5; FW: 1.24.
Erasing. Please wait... error!
ERROR[013]: Erase error.
Attempting to erase...
Done.
SW: 1.7.5; FW: 1.24.
Switch error!!!
Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/(BOOT2 LG MP260) SAMSUNG EMMC QX13MB.BIN file...
Write data verification is disabled.
Writing. Please wait...
ERROR[012]: Write error.
At sector 0.
Attempting to write...
Done.
SW: 1.7.5; FW: 1.24.
Partition table was not found.
Partition table was not found.
Boot config succesfully changed!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MP260
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_MP260_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100515831334D42076AF4DA0864E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) 6AF4DA08
Manufacturing date : 06/2001
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 98304 Kbytes
Boot1 size : 25088 Kbytes
Boot2 size : 25088 Kbytes
RPMB size : 24576 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0xC8) 11001000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + High Speed timings in boot operation
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_04_03_2019_15_12_55.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
Smart report info:
Hash code: 00000000000000000000000000000000000000000000000000 00000000000000
Super block size : 0x00000000 Bytes
Super page size : 0x00000000 Bytes
Optima write size : 0x00000000 Bytes
Number of banks : 0
Bank0 init bad block : 0
Bank0 runtime bad block : 0
Bank0 remain reserved block : 0
Max erase count : 0
Min erase count : 0
Avg erase count : 0
Read reclaim count : 0
Optimal trim size : 0x00000000 Bytes
Max erase count (SCL) : 0
Min erase count (SCL) : 0
Avg erase count (SCL) : 0
Max erase count (MLC) : 0
Min erase count (MLC) : 0
Avg erase count (MLC) : 0
SW: 1.7.5; FW: 1.24.
No General Purpose Partition 1
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 2
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 3
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 4
enhanced attribute is not set
write reliablity is set
No enhanced user data area
write reliablity is not set
Error creating HW partitions!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MP260
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_MP260_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100515831334D42076AF4DA0864E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) 6AF4DA08
Manufacturing date : 06/2001
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 98304 Kbytes
Boot1 size : 25088 Kbytes
Boot2 size : 25088 Kbytes
RPMB size : 24576 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0xC8) 11001000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + High Speed timings in boot operation
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_04_03_2019_15_13_30.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
Error writing EXT_CSD!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MP260
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_MP260_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100515831334D42076AF4DA0864E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) 6AF4DA08
Manufacturing date : 06/2001
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 98304 Kbytes
Boot1 size : 25088 Kbytes
Boot2 size : 25088 Kbytes
RPMB size : 24576 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0xC8) 11001000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + High Speed timings in boot operation
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_04_03_2019_15_14_57.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MP260
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_MP260_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100515831334D42076AF4DA0864E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) 6AF4DA08
Manufacturing date : 06/2001
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 98304 Kbytes
Boot1 size : 25088 Kbytes
Boot2 size : 25088 Kbytes
RPMB size : 24576 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0xC8) 11001000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + High Speed timings in boot operation
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_04_03_2019_14_32_16.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
Switch error!!!
Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/(BOOT1 LG MP260) SAMSUNG EMMC QX13MB.BIN file...
Write data verification is enabled.
Writing. Please wait...
Write verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MP260
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_MP260_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100515831334D42076AF4DA0864E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) 6AF4DA08
Manufacturing date : 06/2001
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 98304 Kbytes
Boot1 size : 25088 Kbytes
Boot2 size : 25088 Kbytes
RPMB size : 24576 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0xC8) 11001000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + High Speed timings in boot operation
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_04_03_2019_14_33_45.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
The same area.
Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/(BOOT1 LG MP260) SAMSUNG EMMC QX13MB.BIN file...
Write data verification is disabled.
Writing. Please wait...
ERROR[012]: Write error.
At sector 0.
Attempting to write...
Done.
SW: 1.7.5; FW: 1.24.
Erasing. Please wait... error!
ERROR[013]: Erase error.
Attempting to erase...
Done.
SW: 1.7.5; FW: 1.24.
Switch error!!!
Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/(BOOT2 LG MP260) SAMSUNG EMMC QX13MB.BIN file...
Write data verification is disabled.
Writing. Please wait...
ERROR[012]: Write error.
At sector 0.
Attempting to write...
Done.
SW: 1.7.5; FW: 1.24.
Partition table was not found.
Partition table was not found.
Boot config succesfully changed!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MP260
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_MP260_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100515831334D42076AF4DA0864E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) 6AF4DA08
Manufacturing date : 06/2001
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 98304 Kbytes
Boot1 size : 25088 Kbytes
Boot2 size : 25088 Kbytes
RPMB size : 24576 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0xC8) 11001000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + High Speed timings in boot operation
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_04_03_2019_15_12_55.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
Smart report info:
Hash code: 00000000000000000000000000000000000000000000000000 00000000000000
Super block size : 0x00000000 Bytes
Super page size : 0x00000000 Bytes
Optima write size : 0x00000000 Bytes
Number of banks : 0
Bank0 init bad block : 0
Bank0 runtime bad block : 0
Bank0 remain reserved block : 0
Max erase count : 0
Min erase count : 0
Avg erase count : 0
Read reclaim count : 0
Optimal trim size : 0x00000000 Bytes
Max erase count (SCL) : 0
Min erase count (SCL) : 0
Avg erase count (SCL) : 0
Max erase count (MLC) : 0
Min erase count (MLC) : 0
Avg erase count (MLC) : 0
SW: 1.7.5; FW: 1.24.
No General Purpose Partition 1
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 2
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 3
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 4
enhanced attribute is not set
write reliablity is set
No enhanced user data area
write reliablity is not set
Error creating HW partitions!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MP260
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_MP260_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100515831334D42076AF4DA0864E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) 6AF4DA08
Manufacturing date : 06/2001
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 98304 Kbytes
Boot1 size : 25088 Kbytes
Boot2 size : 25088 Kbytes
RPMB size : 24576 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0xC8) 11001000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + High Speed timings in boot operation
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_04_03_2019_15_13_30.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
Error writing EXT_CSD!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MP260
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/LG_MP260_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX13MB
Page size : 512 B
Block size : 512 B
Block count : 2097152
Size : 1024.00 MB
---------------------------------------------------------------
CID Info
CID : 150100515831334D42076AF4DA0864E3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX13MB
Product revision : 0.7
Product serial number : (hex) 6AF4DA08
Manufacturing date : 06/2001
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure :
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.0 (for MMC v4.0)
Erase block size : 98304 Kbytes
Boot1 size : 25088 Kbytes
Boot2 size : 25088 Kbytes
RPMB size : 24576 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0xC8) 11001000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + High Speed timings in boot operation
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_04_03_2019_15_14_57.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.5; FW: 1.24.
