SM-J530f dm varity faild solved by full flashing

samsung j530f dm varity error solved by flashing 8.0 binary 3 firmware odin faild to flash stuck at setting partion but z3x flash success here are logos

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-J530F
Software version: 35.2

File analysis... OK
Total file size: 0xFE3ED41C (4067 Mb)
Searching USB Flash interface... COM5 detected
Setup connection... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.lz4... OK
Sending userdata.img.lz4... OK
Sending modem.bin.lz4... OK
Sending cache.img.lz4... OK
Sending hidden.img.lz4... OK
Flashing done (time - 00:04:07)

Done with Samsung Tool PRO v.35.2