Hi
Any solution for this problem?
All operation done without fail, but phone is detected qdloader yet
Any solution for this problem?
All operation done without fail, but phone is detected qdloader yet
Code:
Welcome to Octoplus Pro JTAG Software version 1.7.6.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D325
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D325_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC K5XVMB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004B3558564D4206716CDA183161
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : K5XVMB
Full name : KMK5X000VM-B314
Product revision : 0.6
Product serial number : (hex) 716CDA18
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/K5XVMB_25_04_2019_21_39_05.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: modem (00002000, 00020000) 64 MB
P02: sbl1 (00022000, 00000800) 1024 KB
P03: rpm (00022800, 00000400) 512 KB
P04: tz (00022C00, 00000400) 512 KB
P05: sdi (00023000, 00000400) 512 KB
P06: aboot (00023400, 00001000) 2048 KB
P07: rpmb (00024400, 00000400) 512 KB
P08: tzb (00024800, 00000400) 512 KB
P09: abootb (00024C00, 00001000) 2048 KB
P10: pad (00025C00, 00001000) 2048 KB
P11: modemst1 (00026C00, 00001800) 3072 KB
P12: modemst2 (00028400, 00001800) 3072 KB
P13: misc (00029C00, 00008000) 16 MB
P14: persist (00032000, 00010000) 32 MB
P15: laf (00042000, 0000B000) 22 MB
P16: boot (0004E000, 0000B000) 22 MB
P17: recovery (00059000, 0000B000) 22 MB
P18: fsg (00064000, 00001800) 3072 KB
P19: fsc (00066000, 00000400) 512 KB
P20: ssd (00066400, 00000400) 512 KB
P21: DDR (00068000, 00000400) 512 KB
P22: encrypt (0006A000, 00000400) 512 KB
P23: rct (0006A400, 00000400) 512 KB
P24: drm (0006C000, 00004000) 8 MB
P25: sns (00070000, 00004000) 8 MB
P26: factory (00074000, 0000A000) 20 MB
P27: fota (0007E000, 00010000) 32 MB
P28: sbl1b (0008E000, 00000800) 1024 KB
P29: mpt (0008E800, 00010000) 32 MB
P30: cust (000A0000, 00019000) 50 MB
P31: eksst (000BA000, 00000400) 512 KB
P32: system (000BC000, 002EDC00) 1500 MB
P33: cache (003A9C00, 0007D000) 250 MB
P34: userdata (00426C00, 00310000) 1568 MB
P35: grow (00738000, 0000FFDF) 31.98 MB
Save to C:/Program Files (x86)/Octoplus Pro JTAG Software/Backups/d325f8.mpt file...
Reading partition GPT... Done.
Reading partition modem... Done.
Reading partition sbl1... Done.
Reading partition rpm... Done.
Reading partition tz... Done.
Reading partition sdi... Done.
Reading partition aboot... Done.
Reading partition rpmb... Done.
Reading partition tzb... Done.
Reading partition abootb... Done.
Reading partition pad... Done.
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Reading partition misc... Done.
Reading partition persist... Done.
Reading partition laf... Done.
Reading partition boot... Done.
Reading partition recovery... Done.
Reading partition fsg... Done.
Reading partition fsc... Done.
Reading partition ssd... Done.
Reading partition DDR... Done.
Reading partition encrypt... Done.
Reading partition rct... Done.
Reading partition drm... Done.
Reading partition sns... Done.
Reading partition factory... Done.
Reading partition fota... Done.
Reading partition sbl1b... Done.
Reading partition mpt... Done.
Reading partition cust... Done.
Reading partition eksst... Done.
Reading partition system... Done.
Reading partition cache... Done.
Reading partition userdata... Done.
Reading partition grow... Done.
Reading is finished.
SW: 1.7.6; FW: 1.24.
EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/Backups/d325f/EXT_CSD_26_04_2019_09_44_57.bin.
Factory Format will erase all eMMC data!
Do you want to continue? Yes.
Formating...Done.
SW: 1.7.6; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D325
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D325_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC K5XVMB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004B3558564D4206716CDA183161
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : K5XVMB
Full name : KMK5X000VM-B314
Product revision : 0.6
Product serial number : (hex) 716CDA18
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/K5XVMB_26_04_2019_09_45_32.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
No General Purpose Partition 1
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 2
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 3
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 4
enhanced attribute is not set
write reliablity is set
No enhanced user data area
write reliablity is not set
Creating HW partitions succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D325
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D325_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC K5XVMB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004B3558564D4206716CDA183161
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : K5XVMB
Full name : KMK5X000VM-B314
Product revision : 0.6
Product serial number : (hex) 716CDA18
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/K5XVMB_26_04_2019_09_45_45.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
Writing EXT_CSD succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D325
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D325_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC K5XVMB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004B3558564D4206716CDA183161
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : K5XVMB
Full name : KMK5X000VM-B314
Product revision : 0.6
Product serial number : (hex) 716CDA18
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/K5XVMB_26_04_2019_09_45_59.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
Factory Format will erase all eMMC data!
Do you want to continue? Yes.
Formating...Done.
SW: 1.7.6; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D325
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D325_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC K5XVMB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004B3558564D4206716CDA183161
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : K5XVMB
Full name : KMK5X000VM-B314
Product revision : 0.6
Product serial number : (hex) 716CDA18
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/K5XVMB_26_04_2019_09_46_18.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
No General Purpose Partition 1
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 2
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 3
enhanced attribute is not set
write reliablity is set
No General Purpose Partition 4
enhanced attribute is not set
write reliablity is set
No enhanced user data area
write reliablity is not set
Creating HW partitions succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D325
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D325_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC K5XVMB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004B3558564D4206716CDA183161
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : K5XVMB
Full name : KMK5X000VM-B314
Product revision : 0.6
Product serial number : (hex) 716CDA18
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/K5XVMB_26_04_2019_09_46_28.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
Writing EXT_CSD succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D325
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D325_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC K5XVMB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004B3558564D4206716CDA183161
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : K5XVMB
Full name : KMK5X000VM-B314
Product revision : 0.6
Product serial number : (hex) 716CDA18
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/K5XVMB_26_04_2019_09_46_51.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
Opening J:/FIRMWARE LG/ROM D325F/D-325F/D32510e_0.dz file...
Write data verification is enabled.
Writing. Please wait...
Writing partition PrimaryGPT... Done.
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Writing partition aboot... Done.
Writing partition rpmb... Done.
Writing partition tzb... Done.
Writing partition abootb... Done.
Writing partition persist... Done.
Writing partition laf... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition factory... Done.
Writing partition sbl1b... Done.
Writing partition cust... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition BackupGPT... Done.
Writing is finished.
SW: 1.7.6; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : D325
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D325_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC K5XVMB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 1501004B3558564D4206716CDA183161
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : K5XVMB
Full name : KMK5X000VM-B314
Product revision : 0.6
Product serial number : (hex) 716CDA18
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1269760 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/K5XVMB_26_04_2019_09_59_42.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: modem (00002000, 00020000) 64 MB
P02: sbl1 (00022000, 00000800) 1024 KB
P03: rpm (00022800, 00000400) 512 KB
P04: tz (00022C00, 00000400) 512 KB
P05: sdi (00023000, 00000400) 512 KB
P06: aboot (00023400, 00001000) 2048 KB
P07: rpmb (00024400, 00000400) 512 KB
P08: tzb (00024800, 00000400) 512 KB
P09: abootb (00024C00, 00001000) 2048 KB
P10: pad (00025C00, 00001000) 2048 KB
P11: modemst1 (00026C00, 00001800) 3072 KB
P12: modemst2 (00028400, 00001800) 3072 KB
P13: misc (00029C00, 00008000) 16 MB
P14: persist (00032000, 00010000) 32 MB
P15: laf (00042000, 0000B000) 22 MB
P16: boot (0004E000, 0000B000) 22 MB
P17: recovery (00059000, 0000B000) 22 MB
P18: fsg (00064000, 00001800) 3072 KB
P19: fsc (00066000, 00000400) 512 KB
P20: ssd (00066400, 00000400) 512 KB
P21: DDR (00068000, 00000400) 512 KB
P22: encrypt (0006A000, 00000400) 512 KB
P23: rct (0006A400, 00000400) 512 KB
P24: drm (0006C000, 00004000) 8 MB
P25: sns (00070000, 00004000) 8 MB
P26: factory (00074000, 0000A000) 20 MB
P27: fota (0007E000, 00010000) 32 MB
P28: sbl1b (0008E000, 00000800) 1024 KB
P29: mpt (0008E800, 00010000) 32 MB
P30: cust (000A0000, 00019000) 50 MB
P31: eksst (000BA000, 00000400) 512 KB
P32: system (000BC000, 002EDC00) 1500 MB
P33: cache (003A9C00, 0007D000) 250 MB
P34: userdata (00426C00, 00310000) 1568 MB
P35: grow (00738000, 0000FFDF) 31.98 MB
Disconnected.
