Welcome to Medusa Pro Software version 1.7.6.
Started.
Reader #0: FT SCR2000 0
Reader #1: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G615F
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G615F_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42009787D3CEA461
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 9787D3CE
Manufacturing date : 10/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x04) 00000100
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Retain BOOT_BUS_WIDTH and BOOT_MODE values after boot operation
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 622592
Number of sectors : 6291456
Device Manufacturer :samsung
Device Platform :mt6757
Build ID :NRD90M
Display Build ID :NRD90M.FA70_G615FXXU1AQI1
Release ID :7.0
Device Model :SM-G615F
Device Name :j7maxlteins
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :j7maxlteins-user 7.0 NRD90M FA70_G615FXXU1AQI1 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_27_04_2019_17_18_07.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: lk (00002000, 00001000) 2048 KB
P02: seccfg (00003000, 00000800) 1024 KB
P03: efuse (00003800, 00000800) 1024 KB
P04: nvram (00004000, 00004000) 8 MB
P05: tee1 (00008000, 00004000) 8 MB
P06: BOTA0 (0000C000, 00002000) 4 MB
P07: BOTA1 (0000E000, 00002000) 4 MB
P08: BOTA2 (00010000, 00004000) 8 MB
P09: EFS (00014000, 00004000) 8 MB
P10: protect1 (00018000, 00004000) 8 MB
P11: protect2 (0001C000, 00004000) 8 MB
P12: nvcfg (00020000, 0000C000) 24 MB
P13: nvdata (0002C000, 00010000) 32 MB
P14: PARAM (0003C000, 00004000) 8 MB
P15: recovery (00040000, 0000C000) 24 MB
P16: boot (0004C000, 0000C000) 24 MB
P17: md1img (00058000, 00032000) 100 MB
P18: md1dsp (0008A000, 00001000) 2048 KB
P19: md1arm7 (0008B000, 00001000) 2048 KB
P20: md3img (0008C000, 00004000) 8 MB
P21: proinfo (00090000, 00001800) 3072 KB
P22: boot_para (00091800, 00000800) 1024 KB
P23: para (00092000, 00000400) 512 KB
P24: PERSISTENT (00092400, 00000400) 512 KB
P25: STEADY (00092800, 00002000) 4 MB
P26: NAD_REFER (00094800, 00002800) 5 MB
P27: RESERVED2 (00097000, 00001000) 2048 KB
P28: system (00098000, 00600000) 3072 MB
P29: cache (00698000, 000D8000) 432 MB
P30: hidden (00770000, 00032000) 100 MB
P31: userdata (007A2000, 0329A000) 25.3 GB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G615F_EMMC.SRF".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition...
Write verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
Started.
Reader #0: FT SCR2000 0
Reader #1: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G615F
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G615F_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RX14MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831344D42009787D3CEA461
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX14MB
Product revision : 0.0
Product serial number : (hex) 9787D3CE
Manufacturing date : 10/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x04) 00000100
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Retain BOOT_BUS_WIDTH and BOOT_MODE values after boot operation
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 622592
Number of sectors : 6291456
Device Manufacturer :samsung
Device Platform :mt6757
Build ID :NRD90M
Display Build ID :NRD90M.FA70_G615FXXU1AQI1
Release ID :7.0
Device Model :SM-G615F
Device Name :j7maxlteins
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :j7maxlteins-user 7.0 NRD90M FA70_G615FXXU1AQI1 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RX14MB_27_04_2019_17_18_07.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: lk (00002000, 00001000) 2048 KB
P02: seccfg (00003000, 00000800) 1024 KB
P03: efuse (00003800, 00000800) 1024 KB
P04: nvram (00004000, 00004000) 8 MB
P05: tee1 (00008000, 00004000) 8 MB
P06: BOTA0 (0000C000, 00002000) 4 MB
P07: BOTA1 (0000E000, 00002000) 4 MB
P08: BOTA2 (00010000, 00004000) 8 MB
P09: EFS (00014000, 00004000) 8 MB
P10: protect1 (00018000, 00004000) 8 MB
P11: protect2 (0001C000, 00004000) 8 MB
P12: nvcfg (00020000, 0000C000) 24 MB
P13: nvdata (0002C000, 00010000) 32 MB
P14: PARAM (0003C000, 00004000) 8 MB
P15: recovery (00040000, 0000C000) 24 MB
P16: boot (0004C000, 0000C000) 24 MB
P17: md1img (00058000, 00032000) 100 MB
P18: md1dsp (0008A000, 00001000) 2048 KB
P19: md1arm7 (0008B000, 00001000) 2048 KB
P20: md3img (0008C000, 00004000) 8 MB
P21: proinfo (00090000, 00001800) 3072 KB
P22: boot_para (00091800, 00000800) 1024 KB
P23: para (00092000, 00000400) 512 KB
P24: PERSISTENT (00092400, 00000400) 512 KB
P25: STEADY (00092800, 00002000) 4 MB
P26: NAD_REFER (00094800, 00002800) 5 MB
P27: RESERVED2 (00097000, 00001000) 2048 KB
P28: system (00098000, 00600000) 3072 MB
P29: cache (00698000, 000D8000) 432 MB
P30: hidden (00770000, 00032000) 100 MB
P31: userdata (007A2000, 0329A000) 25.3 GB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G615F_EMMC.SRF".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition...
Write verification error 1. Possible reasons: damaged or write protected eMMC.
Disconnected.
