Hii medusa team j500F boot repair supported or not supported ?
Model Settings: Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u!
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A483847347521012E224D5023B7
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u!
Product revision : 0.1
Product serial number : (hex) 2E224D50
Manufacturing date : 02/2016
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A400013
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u!_26_04_2019_17_03_17.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.8; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: apnhlos (00002000, 00007800) 15 MB
P02: modem (00009800, 0001CB80) 57.44 MB
P03: sbl1 (00026380, 00000400) 512 KB
P04: ddr (00026780, 00000040) 32 KB
P05: aboot (000267C0, 00001000) 2048 KB
P06: rpm (000277C0, 00000400) 512 KB
P07: qsee (00027BC0, 00000400) 512 KB
P08: qhee (00027FC0, 00000400) 512 KB
P09: fsg (000283C0, 00001800) 3072 KB
P10: sec (00029BC0, 00000020) 16 KB
P11: pad (00029BE0, 00005420) 10.52 MB
P12: param (0002F000, 00005000) 10 MB
P13: efs (00034000, 00007000) 14 MB
P14: modemst1 (0003B000, 00001800) 3072 KB
P15: modemst2 (0003C800, 00001800) 3072 KB
P16: boot (0003E000, 00006800) 13 MB
P17: recovery (00044800, 00007800) 15 MB
P18: fota (0004C000, 00006402) 12.5 MB
P19: backup (00052402, 000037EE) 6.991 MB
P20: fsc (00055BF0, 00001800) 3072 KB
P21: ssd (000573F0, 00000010) 8 KB
P22: persist (00057400, 00004000) 8 MB
P23: persistent (0005B400, 00000400) 512 KB
P24: persdata (0005B800, 00004800) 9 MB
P25: system (00060000, 00410000) 2080 MB
P26: cache (00470000, 00064000) 200 MB
P27: hidden (004D4000, 00023000) 70 MB
P28: userdata (004F7000, 00998FD8) 4.799 GB
Please select file.
Disconnected.
Factory firmware write error
Selected pit file: C:/Documents and Settings/Administrator/Desktop/J5LTE_EUR_OPEN.pit
Open file "C:/Documents and Settings/Administrator/Desktop/SM-J500F_1_20180609071501_s0s7sfqy6p_fac/BL_J500FXXU1BRC1_CL10808387_QB17352744_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Open file "C:/Documents and Settings/Administrator/Desktop/SM-J500F_1_20180609071501_s0s7sfqy6p_fac/AP_J500FXXU1BRC1_CL10808387_QB17352744_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Open file "C:/Documents and Settings/Administrator/Desktop/SM-J500F_1_20180609071501_s0s7sfqy6p_fac/CP_J500FXXU1BPF3_REV00_CL2117007_QB4815638.tar.md5 ".
Open file "C:/Documents and Settings/Administrator/Desktop/SM-J500F_1_20180609071501_s0s7sfqy6p_fac/CSC_OJV_J500FOJV1BRC1_CL13280100_QB17648771_REV00_ user_low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition APNHLOS...
Read/write verification error. Possible reasons: damaged or write protected eMMC.
Disconnected.
Model Settings: Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u!
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A483847347521012E224D5023B7
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u!
Product revision : 0.1
Product serial number : (hex) 2E224D50
Manufacturing date : 02/2016
---------------------------------------------------------------
CSD Info
CSD : D07F01320F5903FFFFFFFFEF8A400013
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u!_26_04_2019_17_03_17.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.8; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: apnhlos (00002000, 00007800) 15 MB
P02: modem (00009800, 0001CB80) 57.44 MB
P03: sbl1 (00026380, 00000400) 512 KB
P04: ddr (00026780, 00000040) 32 KB
P05: aboot (000267C0, 00001000) 2048 KB
P06: rpm (000277C0, 00000400) 512 KB
P07: qsee (00027BC0, 00000400) 512 KB
P08: qhee (00027FC0, 00000400) 512 KB
P09: fsg (000283C0, 00001800) 3072 KB
P10: sec (00029BC0, 00000020) 16 KB
P11: pad (00029BE0, 00005420) 10.52 MB
P12: param (0002F000, 00005000) 10 MB
P13: efs (00034000, 00007000) 14 MB
P14: modemst1 (0003B000, 00001800) 3072 KB
P15: modemst2 (0003C800, 00001800) 3072 KB
P16: boot (0003E000, 00006800) 13 MB
P17: recovery (00044800, 00007800) 15 MB
P18: fota (0004C000, 00006402) 12.5 MB
P19: backup (00052402, 000037EE) 6.991 MB
P20: fsc (00055BF0, 00001800) 3072 KB
P21: ssd (000573F0, 00000010) 8 KB
P22: persist (00057400, 00004000) 8 MB
P23: persistent (0005B400, 00000400) 512 KB
P24: persdata (0005B800, 00004800) 9 MB
P25: system (00060000, 00410000) 2080 MB
P26: cache (00470000, 00064000) 200 MB
P27: hidden (004D4000, 00023000) 70 MB
P28: userdata (004F7000, 00998FD8) 4.799 GB
Please select file.
Disconnected.
Factory firmware write error
Selected pit file: C:/Documents and Settings/Administrator/Desktop/J5LTE_EUR_OPEN.pit
Open file "C:/Documents and Settings/Administrator/Desktop/SM-J500F_1_20180609071501_s0s7sfqy6p_fac/BL_J500FXXU1BRC1_CL10808387_QB17352744_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Open file "C:/Documents and Settings/Administrator/Desktop/SM-J500F_1_20180609071501_s0s7sfqy6p_fac/AP_J500FXXU1BRC1_CL10808387_QB17352744_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Open file "C:/Documents and Settings/Administrator/Desktop/SM-J500F_1_20180609071501_s0s7sfqy6p_fac/CP_J500FXXU1BPF3_REV00_CL2117007_QB4815638.tar.md5 ".
Open file "C:/Documents and Settings/Administrator/Desktop/SM-J500F_1_20180609071501_s0s7sfqy6p_fac/CSC_OJV_J500FOJV1BRC1_CL13280100_QB17648771_REV00_ user_low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition APNHLOS...
Read/write verification error. Possible reasons: damaged or write protected eMMC.
Disconnected.
