-->

Monday, May 6, 2019

Unlock j250y ok

  Unlock4samsung       Monday, May 6, 2019
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-J250Y
Software version: 36.1

Checking Login and Password... OK
Ballance: 20 crd.
You have 20 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J250Y
Android version: 7.1.1
PDA version: J250YXXU1ARC7
CSC version: J250YOXA1ARC7
Phone version: J250YXXU1ARC7
Product code: SM-J250YZKDXEF
CSC country code: France
CSC sales code: XEF
Phone SN: R58K93KWJXV
IMEI: 35664709XXXXXXX
HW version: MP0.900
RF cal date: 2018.09.19
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2018-04-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM6 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 27281693
NET lock: 40731705
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
If codes are not accepted, then flash latest firmware

Done with Samsung Tool PRO v.36.1
logoblog