problem was emergency call only
error in write in imei
error in patch certificate
error in nv writing
done by reseting efs just select g920f
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.
Operation: Reset EFS
Selected model: SM-G920F
Software version: 36.8
Waiting ADB device... OK
Reading phone info...
Model: SM-G930F
Android version: 8.0.0
PDA version: G930FXXS5ESDB
CSC version: G930FUWT5ESDA
Phone version: G930FXXS5ESDA
Product code: SM-G930FZDAPVT
CSC country code: Chile
CSC sales code: CHT
Phone SN: R58H44N5LRM
IMEI: 358501866735868
HW version: MP 0.700
RF cal date: 20160908
Chip name: EXYNOS8890
Modem board: SHANNON335
Security patch: 2019-04-01
Boot Warranty bit: 1
Incorrect model selected. This may damage your phone. Continue? Yes
Checking Super user right... true
Backuping EFS... OK
Reseting EFS... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.36.8
done
error in write in imei
error in patch certificate
error in nv writing
done by reseting efs just select g920f
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.
Operation: Reset EFS
Selected model: SM-G920F
Software version: 36.8
Waiting ADB device... OK
Reading phone info...
Model: SM-G930F
Android version: 8.0.0
PDA version: G930FXXS5ESDB
CSC version: G930FUWT5ESDA
Phone version: G930FXXS5ESDA
Product code: SM-G930FZDAPVT
CSC country code: Chile
CSC sales code: CHT
Phone SN: R58H44N5LRM
IMEI: 358501866735868
HW version: MP 0.700
RF cal date: 20160908
Chip name: EXYNOS8890
Modem board: SHANNON335
Security patch: 2019-04-01
Boot Warranty bit: 1
Incorrect model selected. This may damage your phone. Continue? Yes
Checking Super user right... true
Backuping EFS... OK
Reseting EFS... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.36.8
done
