-->

Monday, June 10, 2019

samsung i9195 replace emmc and repair boot but still dead

  Unlock4samsung       Monday, June 10, 2019
hi i have replaced a emmc for samsung i9195 and repair boot succeflly but no power stuck on Qualcomm HS-USB Qloader 9800

Model Settings:
Interface : eMMC
Voltage : 2.0V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Toshiba eMMC 008GE0
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID : 110100303038474530045EE8F4A981EF
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 008GE0
Product revision : 0.4
Product serial number : (hex) 5EE8F4A9
Manufacturing date : 08/2014
---------------------------------------------------------------
CSD Info

CSD : D05E00320F5903FFFFFFFFEF924000D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 5 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 344064
Number of sectors : 3072000
Device Manufacturer :samsung
Device Platform :msm8960
Build ID :KOT49H
Display Build ID :KOT49H.I9195XXUCQG1
Release ID :4.4.2
Device Model :GT-I9195
Device Name :serranoltexx
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :serranoltexx-user 4.4.2 KOT49H I9195XXUCQG1 release-keys

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/008GE0_10_06_2019_10_16_38.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: modem (00002000, 0001E000) 60 MB
P02: sbl1 (00020000, 00000100) 128 KB
P03: sbl2 (00020100, 00000200) 256 KB
P04: sbl3 (00020300, 00000400) 512 KB
P05: aboot (00020700, 00001000) 2048 KB
P06: rpm (00021700, 00000400) 512 KB
P07: tz (00021B00, 00000400) 512 KB
P08: pad (00021F00, 00006400) 12.5 MB
P09: param (00028300, 00004000) 8 MB
P10: efs (0002C300, 00006D00) 13.62 MB
P11: modemst1 (00033000, 00001800) 3072 KB
P12: modemst2 (00034800, 00001800) 3072 KB
P13: boot (00036000, 00005000) 10 MB
P14: recovery (0003B000, 00005000) 10 MB
P15: fota (00040000, 00005000) 10 MB
P16: backup (00045000, 000037F0) 6.992 MB
P17: fsg (000487F0, 00001800) 3072 KB
P18: ssd (00049FF0, 00000010) 8 KB
P19: persist (0004A000, 00004000) 8 MB
P20: persdata (0004E000, 00006000) 12 MB
P21: system (00054000, 002EE000) 1500 MB
P22: cache (00342000, 00064000) 200 MB
P23: hidden (003A6000, 00064000) 200 MB
P24: userdata (0040A000, 00A85FDF) 5.262 GB
Erasing partition GPT... Done.
Erasing partition modem... Done.
Erasing partition sbl1... Done.
Erasing partition sbl2... Done.
Erasing partition sbl3... Done.
Erasing partition aboot... Done.
Erasing partition rpm... Done.
Erasing partition tz... Done.
Erasing partition pad... Done.
Erasing partition param... Done.
Erasing partition efs... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Erasing partition boot... Done.
Erasing partition recovery... Done.
Erasing partition fota... Done.
Erasing partition backup... Done.
Erasing partition fsg... Done.
Erasing partition ssd... Done.
Erasing partition persist... Done.
Erasing partition persdata... Done.
Erasing partition system... Done.
Erasing partition cache... Done.
Erasing partition hidden... Done.
Erasing partition userdata... Done.
Erasing is finished.
SW: 1.7.7; FW: 1.24.

Selected pit file: C:/Users/b/Desktop/I9195XXSCQAE_XEOCOD1_Repair_Firmware_4Files/SERRANOLTE_EUR_OPEN.pit

Open file "C:/Users/b/Desktop/I9195XXSCQAE_XEOCOD1_Repair_Firmware_4Files/BL_I9195XXSCQAE_CL4770408_QB12238232_REV01_user_lo w_ship_MULTI_CERT.tar.md5".


Open file "C:/Users/b/Desktop/I9195XXSCQAE_XEOCOD1_Repair_Firmware_4Files/AP_I9195XXSCQAE_CL4770408_QB12238232_REV01_user_lo w_ship_MULTI_CERT.tar.md5".


Open file "C:/Users/b/Desktop/I9195XXSCQAE_XEOCOD1_Repair_Firmware_4Files/CP_I9195XXSCQAE_CL4770408_QB12238232_REV01_user_lo w_ship_MULTI_CERT.tar.md5".


Open file "C:/Users/b/Desktop/I9195XXSCQAE_XEOCOD1_Repair_Firmware_4Files/CSC_XEO_I9195XEOCOD1_CL4800809_QB4798955_REV01_use r_low_ship_MULTI_CERT.tar.md5".


Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Writing partition MODEM... Done.
Writing partition SBL1... Done.
Writing partition SBL2... Done.
Writing partition SBL3... Done.
Writing partition ABOOT... Done.
Writing partition RPM... Done.
Writing partition TZ... Done.
Writing partition BOOT... Done.
Writing partition RECOVERY... Done.
Writing partition PERSIST... Done.
Writing partition PERSDATA... Done.
Writing partition SYSTEM... Done.
Writing partition CACHE... Done.
Writing partition HIDDEN... Done.
Writing is finished.
SW: 1.7.7; FW: 1.24.
Disconnected.
logoblog

Previous
« Prev Post