SM-N9600 Flash STOCK firmware FAIL.

Now I have SM-N9600 with bricked FW and cause of FRP is on I can't flash STOCK FW.


Before flash:

Here is the LOG:

Operation: Flash
Selected model: SM-N960F
Software version: 36.8

File analysis... OK
Total file size: 0x17EA6C74E (6122 Mb)
Searching USB Flash interface... COM9 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending abl.elf.lz4... OK
Sending xbl.elf.lz4... OK
Sending xbl_config.elf.lz4... OK
Sending tz.mbn.lz4... OK
Sending hyp.mbn.lz4... OK
Sending devcfg.mbn.lz4... OK
Sending pmic.elf.lz4... OK
Sending aop.mbn.lz4... OK
Sending cmnlib.mbn.lz4... OK
Sending cmnlib64.mbn.lz4... OK
Sending keymaster64.mbn.lz4... OK
Sending qupv3fw.elf.lz4... OK
Sending sec.dat.lz4... OK
Sending apdp.mbn.lz4... OK
Sending msadp.mbn.lz4... OK
Sending bksecapp.mbn.lz4... OK
Sending storsec.mbn.lz4... OK
Sending vaultkeeper.mbn.lz4... OK
Sending engmode.mbn.lz4... OK
Sending NON-HLOS.bin.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending system.img.ext4.lz4... error timeout

Done with Samsung Tool PRO v.36.8

frp is enabled ignore pit download

Tried different firmwares, U2 because i had N9600ZCU2CSE7 before changing fw to Mexico ZHC and later back to China fw N9600ZCU2CSE7. Tried flash with TGY (Original CSC) - same result.
When i try to flash latest combination I get: FRP is enabled, not allowed to download non-FRP abl binary
Help me please!