Hello.
I have connected successfully the samsung SM-J415G with the loader for SM-J610F.
But when I'm trying to write factory firmware. It would load the pit, but when I insert the tar firmware. The software won't load the files for each partition. After inserting the 4 part firmware, all the partitions stay grey, can't select any.
Is there something wrong from my part or is it software problem?
Here is the log:
Welcome to Medusa Pro Software version 1.7.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Reader #3: FT SCR2000 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J610F
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J610F_EMMC.srf
Voltage : 2.4V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX63MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100515836334D420070EAA870B537
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX63MB
Product revision : 0.0
Product serial number : (hex) 70EAA870
Manufacturing date : 11/2018
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 704512
Number of sectors : 5111808
Device Manufacturer :samsung
Build ID :M1AJQ
Display Build ID :M1AJQ.J415GUBU1ASA4
Release ID :8.1.0
Device Model :SM-J415G
Device Name :j4primelteub
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :j4primelteub-user 8.1.0 M1AJQ J415GUBU1ASA4 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX63MB_25_07_2019_19_19_11.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000040) 32 KB
P04: limits (00002840, 00000040) 32 KB
P05: aboot (00002880, 00001000) 2048 KB
P06: rpm (00003880, 00000400) 512 KB
P07: tz (00003C80, 00001000) 2048 KB
P08: hyp (00004C80, 00000400) 512 KB
P09: devcfg (00005080, 00000200) 256 KB
P10: fsg (00005280, 00001800) 3072 KB
P11: sec (00006A80, 00000020) 16 KB
P12: keymaster (00006AA0, 00000400) 512 KB
P13: cmnlib (00006EA0, 00000200) 256 KB
P14: cmnlib64 (000070A0, 00000200) 256 KB
P15: lksecapp (000072A0, 00000400) 512 KB
P16: apdp (000076A0, 00000200) 256 KB
P17: mdsap (000078A0, 00000200) 256 KB
P18: pad (00007AA0, 00000560) 688 KB
P19: modemst1 (00008000, 00001800) 3072 KB
P20: modemst2 (00009800, 00001800) 3072 KB
P21: param (0000B000, 00005000) 10 MB
P22: efs (00010000, 00007000) 14 MB
P23: boot (00017000, 00010000) 32 MB
P24: recovery (00027000, 00010000) 32 MB
P25: dtbo (00037000, 00004000) 8 MB
P26: bota (0003B000, 00003800) 7 MB
P27: fota (0003E800, 00002802) 5.001 MB
P28: backup (00041002, 00002FF6) 5.995 MB
P29: fsc (00043FF8, 00001800) 3072 KB
P30: ssd (000457F8, 00000010) 8 KB
P31: persist (00045808, 00010000) 32 MB
P32: persistent (00055808, 00000800) 1024 KB
P33: misc (00056008, 00000800) 1024 KB
P34: steady (00056808, 00002000) 4 MB
P35: keystore (00058808, 00000400) 512 KB
P36: config (00058C08, 00000040) 32 KB
P37: mota (00058C48, 00000400) 512 KB
P38: dpo (00059048, 00000200) 256 KB
P39: mdtp (00059248, 00000080) 64 KB
P40: dip (000592C8, 00000800) 1024 KB
P41: oem (00059AC8, 00000080) 64 KB
P42: mcfg (00059B48, 00002000) 4 MB
P43: dsp (0005BB48, 00008000) 16 MB
P44: modem (00063B48, 0002DCB8) 91.59 MB
P45: apnhlos (00091800, 00019000) 50 MB
P46: reserved2 (000AA800, 00001800) 3072 KB
P47: system (000AC000, 004E0000) 2496 MB
P48: vendor (0058C000, 000C0000) 384 MB
P49: odm (0064C000, 00098000) 304 MB
P50: cache (006E4000, 00034000) 104 MB
P51: hidden (00718000, 00002800) 5 MB
P52: omr (0071A800, 0000A000) 20 MB
P53: userdata (00724800, 033197D8) 25.55 GB
Backuping FRP data...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x55808_0x800_25_07_2019_19_19_18.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.7.7; FW: 1.24.
Removing FRP. Please wait... Done.
SW: 1.7.7; FW: 1.24.
Selected pit file: E:/Firmwares/Samsung/SM-J415/J415GUBU1ASA4_OWO1ARK3_8.1.0_Full_Unbranded/J4PRIMELTE_LTN_OPEN.pit
Open file "E:/Firmwares/Samsung/SM-J415/J415GUBU1ASA4_OWO1ARK3_8.1.0_Full_Unbranded/BL_J415GUBU1ASA4_CL14556779_QB21691546_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Open file "E:/Firmwares/Samsung/SM-J415/J415GUBU1ASA4_OWO1ARK3_8.1.0_Full_Unbranded/AP_J415GUBU1ASA4_CL14556779_QB21691546_REV00_user_ low_ship_MULTI_CERT_meta.tar.md5".
Open file "E:/Firmwares/Samsung/SM-J415/J415GUBU1ASA4_OWO1ARK3_8.1.0_Full_Unbranded/CP_J415GUBU1ASA1_CP11747647_CL14556779_QB21693156_ REV00_user_low_ship_MULTI_CERT.tar.md5".
Open file "E:/Firmwares/Samsung/SM-J415/J415GUBU1ASA4_OWO1ARK3_8.1.0_Full_Unbranded/CSC_OMC_OWO_J415GOWO1ARK3_CL14834819_QB20737684_RE V00_user_low_ship_MULTI_CERT.tar.md5".
I have connected successfully the samsung SM-J415G with the loader for SM-J610F.
But when I'm trying to write factory firmware. It would load the pit, but when I insert the tar firmware. The software won't load the files for each partition. After inserting the 4 part firmware, all the partitions stay grey, can't select any.
Is there something wrong from my part or is it software problem?
Here is the log:
Welcome to Medusa Pro Software version 1.7.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Reader #3: FT SCR2000 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J610F
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-J610F_EMMC.srf
Voltage : 2.4V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QX63MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100515836334D420070EAA870B537
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QX63MB
Product revision : 0.0
Product serial number : (hex) 70EAA870
Manufacturing date : 11/2018
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 704512
Number of sectors : 5111808
Device Manufacturer :samsung
Build ID :M1AJQ
Display Build ID :M1AJQ.J415GUBU1ASA4
Release ID :8.1.0
Device Model :SM-J415G
Device Name :j4primelteub
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :j4primelteub-user 8.1.0 M1AJQ J415GUBU1ASA4 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX63MB_25_07_2019_19_19_11.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000040) 32 KB
P04: limits (00002840, 00000040) 32 KB
P05: aboot (00002880, 00001000) 2048 KB
P06: rpm (00003880, 00000400) 512 KB
P07: tz (00003C80, 00001000) 2048 KB
P08: hyp (00004C80, 00000400) 512 KB
P09: devcfg (00005080, 00000200) 256 KB
P10: fsg (00005280, 00001800) 3072 KB
P11: sec (00006A80, 00000020) 16 KB
P12: keymaster (00006AA0, 00000400) 512 KB
P13: cmnlib (00006EA0, 00000200) 256 KB
P14: cmnlib64 (000070A0, 00000200) 256 KB
P15: lksecapp (000072A0, 00000400) 512 KB
P16: apdp (000076A0, 00000200) 256 KB
P17: mdsap (000078A0, 00000200) 256 KB
P18: pad (00007AA0, 00000560) 688 KB
P19: modemst1 (00008000, 00001800) 3072 KB
P20: modemst2 (00009800, 00001800) 3072 KB
P21: param (0000B000, 00005000) 10 MB
P22: efs (00010000, 00007000) 14 MB
P23: boot (00017000, 00010000) 32 MB
P24: recovery (00027000, 00010000) 32 MB
P25: dtbo (00037000, 00004000) 8 MB
P26: bota (0003B000, 00003800) 7 MB
P27: fota (0003E800, 00002802) 5.001 MB
P28: backup (00041002, 00002FF6) 5.995 MB
P29: fsc (00043FF8, 00001800) 3072 KB
P30: ssd (000457F8, 00000010) 8 KB
P31: persist (00045808, 00010000) 32 MB
P32: persistent (00055808, 00000800) 1024 KB
P33: misc (00056008, 00000800) 1024 KB
P34: steady (00056808, 00002000) 4 MB
P35: keystore (00058808, 00000400) 512 KB
P36: config (00058C08, 00000040) 32 KB
P37: mota (00058C48, 00000400) 512 KB
P38: dpo (00059048, 00000200) 256 KB
P39: mdtp (00059248, 00000080) 64 KB
P40: dip (000592C8, 00000800) 1024 KB
P41: oem (00059AC8, 00000080) 64 KB
P42: mcfg (00059B48, 00002000) 4 MB
P43: dsp (0005BB48, 00008000) 16 MB
P44: modem (00063B48, 0002DCB8) 91.59 MB
P45: apnhlos (00091800, 00019000) 50 MB
P46: reserved2 (000AA800, 00001800) 3072 KB
P47: system (000AC000, 004E0000) 2496 MB
P48: vendor (0058C000, 000C0000) 384 MB
P49: odm (0064C000, 00098000) 304 MB
P50: cache (006E4000, 00034000) 104 MB
P51: hidden (00718000, 00002800) 5 MB
P52: omr (0071A800, 0000A000) 20 MB
P53: userdata (00724800, 033197D8) 25.55 GB
Backuping FRP data...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x55808_0x800_25_07_2019_19_19_18.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.7.7; FW: 1.24.
Removing FRP. Please wait... Done.
SW: 1.7.7; FW: 1.24.
Selected pit file: E:/Firmwares/Samsung/SM-J415/J415GUBU1ASA4_OWO1ARK3_8.1.0_Full_Unbranded/J4PRIMELTE_LTN_OPEN.pit
Open file "E:/Firmwares/Samsung/SM-J415/J415GUBU1ASA4_OWO1ARK3_8.1.0_Full_Unbranded/BL_J415GUBU1ASA4_CL14556779_QB21691546_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Open file "E:/Firmwares/Samsung/SM-J415/J415GUBU1ASA4_OWO1ARK3_8.1.0_Full_Unbranded/AP_J415GUBU1ASA4_CL14556779_QB21691546_REV00_user_ low_ship_MULTI_CERT_meta.tar.md5".
Open file "E:/Firmwares/Samsung/SM-J415/J415GUBU1ASA4_OWO1ARK3_8.1.0_Full_Unbranded/CP_J415GUBU1ASA1_CP11747647_CL14556779_QB21693156_ REV00_user_low_ship_MULTI_CERT.tar.md5".
Open file "E:/Firmwares/Samsung/SM-J415/J415GUBU1ASA4_OWO1ARK3_8.1.0_Full_Unbranded/CSC_OMC_OWO_J415GOWO1ARK3_CL14834819_QB20737684_RE V00_user_low_ship_MULTI_CERT.tar.md5".
